User manual NINTENDO NEW 3DS

[. . . ] 133 This product is a precision electronic device that can be damaged by direct physical impact or contact with dust or other foreign material. A protective carrying case (sold separately) may help prevent damage to your New Nintendo 3DS™ XL system. Please carefully read this Operations Manual before setup or use of the New Nintendo 3DS XL system. If, after reading all of the instructions, you still have questions, please visit our customer service area at support. [. . . ] 2 3 Tap the name of your wireless network to select it. Enter a password, code, or key if required. A screen will be displayed if your access point has security settings configured. You must enter the security password for the access point for your system to be able to connect to it. This may also be called an encryption key or network password on your wireless network setup. For information on accessing and locating the security settings on your router, refer to the user manual for your router. 2 Tap the connection method that matches your router. 3 On your Wi-Fi Protected Setup compatible router, you will have either one of the following options: NOTE: It may take up to two minutes to complete the connection. NOTE: If the connection test fails and an error code is displayed, follow the instructions displayed in the error message, or visit support. Com and use the Error Code Lookup tool for information on resolving the error. Push-Button Connection Hold down the Wi-Fi Protected Setup button on the access point until the corresponding light flashes. OR PIN Connection Use the number displayed on the Nintendo 2DS screen to configure your router, then tap Next. About security settings The table below lists different types of encryption methods for access points and the level of security they may provide. Security encryption methods Level of security WEP Decreased security WPA™-PSK (TKIP) WPA2™-PSK (TKIP) WPA-PSK (AES) WPA2-PSK (AES) Increased security Internet Settings 4 When a Settings Complete screen appears on your system, tap OK to run a connection test. if the connection test succeeds , setup is complete. NOTE: The connection test may fail if you try to connect immediately after finishing setup. Wait one or two minutes before trying the connection test. 37 Setup using AOSS™ Setup is easy if you use a wireless router that includes the AOSS feature. This is found on many routers sold under the Buffalo™ brand name. Read the instruction manual for your router for additional information about using AOSS. NOTE: If you use AOSS, your access point settings may sometimes change. Computers and other devices connected without using AOSS sometimes lose the ability to connect to the Internet and may need to be reconfigured. [. . . ] All advertising materials mentioning features or use of this software must display the following acknowledgement: ”This product includes cryptographic software written by Eric Young (eay@cryptsoft. Com)” The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related :-). If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: This product includes software written by Tim Hudson (tjh@cryptsoft. The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. [. . . ]