User manual NINTENDO WII KIRBYS EPIC YARN

[. . . ] The manual contains important health and safety information. Be sure to read the sections on: · Additionally, you must use Wii game software that supports Wii Balance Board gameplay. Look for this icon on game packaging for games that are designed to be used with the Wii Balance Board. Unlicensed Accessories: Do not attach unlicensed accessories to the Wii Remote, as the use of unlicensed accessories may lead to injury to yourself or others and may cause performance issues and/or damage to the system. [. . . ] Use a set of four batteries from the same manufacturer with the same specifications. Remove the battery cover on the bottom of the Wii Balance Board and insert four AA batteries. Be sure to insert the negative (­) end first when inserting new batteries, and remove the positive (+) end first when replacing the batteries. IMPORTANT: Always replace the battery cover to prevent moisture, dirt, dust or other foreign matter from entering the battery compartment. CHECKING BATTERY LIFE: You can check the remaining battery life by pressing the HOME Button on the Wii Remote to bring up the HOME Menu Screen. the battery indicator for the board will appear in the P4 position on the menu screen. NOTE: If you select Wii MENU or RESET from the menu screen, any unsaved data for the game you are playing will be lost. The Wii Balance Board should be located directly in front of your TV as shown below, with the Wii Remote between 3 and 10 feet (1 and 3 meters) from the Sensor Bar. The Power Button faces away from the TV. IMPORTANT: To operate correctly, the Wii Balance Board must be synchronized with the Wii console using Standard Mode Synchronization. Follow the steps below to synchronize the board to the console. You are now ready to play the Wii Balance Board compatible Game Disc. Please refer to the instruction booklet for the Game Disc you are using for further information on gameplay. nOTE: · Only one Wii Balance Board can be synchronized to a Wii console at a time. Up to a total of 10 Wii Remotes and accessories can be synchronized to a console at any time with the Standard Mode procedure. If additional synchronizations are made, the oldest existing ones will be overwritten. The Wii Balance Board can only be synchronized to one console at a time using the Standard Mode procedure. If you change the console you are using the board with, you will have to repeat the synchronization procedure each time. If a Wii Remote is actively using P4, that remote will be disconnected while the board is being used. For proper operation, it is important that no object or material, such as carpeting, touches the bottom surface of the board. Wii Balance Board foot extensions can be added to the Balance Sensors if you are using the board on thick carpet. If the Wii Balance Board fails to operate, or operates incorrectly, follow the steps below before seeking assistance. [. . . ] Make sure they are pushed on all the way to assure that the board will lay flat and stable. If the Wii Balance Board still does not work, follow the information at the bottom of this page. Review the Instruction booklet for the game you are playing to make sure you are performing the correct actions for that game. Make sure the board has been placed correctly (see page 6). [. . . ]