User manual NISSAN PATHFINDER 2007

[. . . ] FOREWORD Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure. [. . . ] *No satellite radio reception is available and "NO SAT" is displayed when the SAT button is pressed unless optional satellite receiver and antenna are installed, and an XM or SIRIUSTM satellite radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. If a compact disc is playing when the FM·AM or SAT* radio select button is pressed, the compact disc will automatically be turned off and the last radio station played will come on. The FM stereo indicator ST will glow during FM stereo reception. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception. CAT FOLDER (tuning) button: To manually tune the radio, press the CAT FOLDER button or or turn the tuning knob to right or left. To move quickly through the channels, press and or button down for hold either the more than 1. 5 seconds. SEEK/TRACK tuning button: Press the SEEK/TRACK button or for less than 1. 5 seconds to tune from high to low or low to high frequencies and stop at the next broadcasting station. To seek quickly through the channels, press and hold the SEEK/TRACK button for more than 1. 5 seconds. When the button is released the radio will seek to the next broadcasting station. SCAN RPT tuning (Type A, B and D only): Press the SCAN RPT button for more than 1. 5 seconds to stop at each broadcasting station (AM, FM or SAT if so equipped) for 5 seconds. Pressing the button again during this 5 second period will stop scan tuning and the radio will remain tuned to that station. If the SCAN RPT button is not pressed within 5 seconds, scan tuning moves to the next station. PRESET A·B·C (Station memory operations): 18 stations can be set for the FM, AM and SAT (satellite, if so equipped) radio to the A, B and C preset button in any combination of FM, AM or SAT stations. Choose preset bank A, B or C using the PRESET A·B·C select button. Select the desired FM, AM or SAT station band. Tune to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 ­ 6) until a beep sound is heard. The channel indicator will then come on and the sound will resume. Other buttons can be set in the same manner. If the battery cable is disconnected, or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Radio data system (RDS): RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band). Cur- 4-44 Display screen, heater, air conditioner and audio systems rently, most RDS stations are in large cities, but many stations are now considering broadcasting RDS data. [. . . ] Vehicle dynamic control (VDC) off switch. Vehicle identification number (VIN) (Chassis number). Vehicle identification number (VIN) plate . . 9-9 10-6 Vehicle loading information. [. . . ]