User manual NISSAN PATHFINDER LE SPECIFICATION DATA

[. . . ] Do not remove this manual from the vehicle when selling this vehicle. The next user of this navigation system may need the manual. Because of possible specification changes, sections of this manual may not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. [. . . ] If you enter this route, the voice guide will start. INFO: If you want to cancel the route calculation, press the ENTER button. If you set a place which is not suitable as a destination, the suggested route will not be displayed. In such a case, the OK key will be displayed on the screen. Reset a correct destination. If route calculation is not possible with all the set preferences, the system may look up a route that does not exactly correspond to the preferences. When deleting the settings of destinations or waypoints, press the ROUTE button. Enlarged intersection display When the vehicle approaches a guide point such as an intersection, the enlarged map of the point will be displayed. 5-36 How do I program a destination? NOTE: When the guide point is close to the guidance start point, the enlarged map may not be displayed. The guide point name may not be displayed. The position of the vehicle icon on the enlarged map may differ from the position on the current display. The map screen will appear. INV1303 INV1304 INFO: When no operation is executed with the enlarged map displayed, the map stays displayed. If route numbers are included in the map data, route numbers will be displayed on the left side of the screen. If street names are displayed in two lines, route numbers will not be displayed. INFO: To display the enlarged map, press the MAP button or PREV button. The display shows several keys on the right of the screen. Select the Quick Stop key. How do I program a destination?5-41 INV1878 INV1879 INV1880 2. The display shows the [QUICK STOP] screen. INFO: Five categories are displayed on the screen. When you use a POI category frequently, it is convenient to use the quick stop function. Please refer to "Quick stop customer setting" on page 5-43. 3. The cuisine selection screen is displayed only when the RESTAURANT key is selected. Select the All key or Fast Food key. 4. The display shows the direction and distance from the current vehicle position to the selected facility. Select the facility name you want to set as a destination (waypoints). 5-42 How do I program a destination? INV1881 INV1781 INV1882 5. [. . . ] Route guidance is set OFF. Remedy This condition is not abnormal. Go back to the suggested route or request route calculation again. Follow the actual rules and regulations of the roads upon which you are driving. The guidance content does not correspond to the actual condition. The content of the voice guidance may vary, depending on the types of junctions at which turns are made. 13-8 Troubleshooting guide ROUTE CALCULATION Symptom Although the system is set with the moving direction as the preference, it does not find the route by matching the preference. Route is not indicated. Possible cause There is no route found in that direction. Remedy This condition is not abnormal. There is no road that can be found by this system close to the destination. Reset the destination closer to the road displayed in orange. Especially with roads which have separate lanes for opposite directions, be careful in setting the destination or waypoints on it, because results may differ depending on the lane you choose. [. . . ]