User manual NISSAN TITAN NAVIGATION SYSTEM-2004

[. . . ] FOREWORD Thank you for purchasing a NISSAN automobile. This user's manual is for the navigation system only. Please read this manual carefully to ensure safe operation of the navigation system. This manual contains operating instructions for the NISSAN Navigation System offered in your NISSAN vehicle Please read your vehicle's owner's manual first. [. . . ] The preset destination (waypoints) will be deleted. 3. INFO: button to return to the To set a new destination (waypoints), refer to "Expert mode categories" or "Easy mode categories" on page 5-2. If you reset the new destination (waypoints), the older destination (waypoints) will be deleted. If you have requested a route calculation, the previous suggested route will be deleted from memory. The destination and waypoint can be deleted at one time. Several keys will be displayed on the right of the screen. Select the Edit Route key. 5-40 How do I program a destination? QUICK STOP INV1875 INV1876 INV1314 2. The [EDIT ROUTE] screen will be displayed. Select the Yes key. The system will display pre-defined POI's (Points of Interest) in the current vicinity of the vehicle and the distances to them. These POI's can be gas stations, hotels, restaurants, ATM's or customer-programmed facilities. This function will operate while the vehicle is moving. The display shows several keys on the right of the screen. Select the Quick Stop key. How do I program a destination?5-41 INV1878 INV1879 INV1880 2. The display shows the [QUICK STOP] screen. INFO: Five categories are displayed on the screen. When you use a POI category frequently, it is convenient to use the quick stop function. Please refer to "Quick stop customer setting" on page 5-43. 3. The cuisine selection screen is displayed only when the RESTAURANT key is selected. Select the All key or Fast Food key. 4. The display shows the direction and distance from the current vehicle position to the selected facility. Select the facility name you want to set as a destination (waypoints). 5-42 How do I program a destination? INV1881 INV1781 INV1882 5. Set route priorities, then select the OK key. [. . . ] This condition is not abnormal. The starting point to the destination is too close. The present location is about 1, 100 miles (1, 770 km) away from the destination. The route is not displayed continuously at waypoints, for example, that are not calculated route from the vehicle's current position. The suggested route the vehicle has traveled is erased. [. . . ]