User manual NISSAN TITAN NAVIGATION SYSTEM-2005

[. . . ] FOREWORD Thank you for purchasing a NISSAN automobile. This user's manual is for the navigation system only. This manual contains operating instructions for the NISSAN navigation system offered in the following models: Altima Armada Maxima Pathfinder Quest Titan Please read this manual carefully to ensure safe operation of the navigation system. This manual contains operating instructions for the NISSAN Navigation System offered in your NISSAN vehicle Please read your vehicle's owner's manual first. [. . . ] If route numbers are included in the map data, route numbers will be displayed on the left side of the screen. If street names are displayed in two lines, route numbers will not be displayed. INFO: To display the enlarged map, press the MAP button or PREV button. When the vehicle arrives at the neighborhood of the destination, the route guidance will end automatically. INFO: To alternate between the map and the enlarged screen, press the MAP button or PREV button. In the map screen, the distance to the next guide point and the turning direction will be displayed on the right side of the screen. How do I program a destination?5-37 ADJUSTING AND DELETING THE PRESET DESTINATION (waypoints) Using the joystick, you can adjust the destination (waypoints). Press the ROUTE button. INV1868 INV1869 2. Choose the destination (waypoints) you want to adjust on the [EDIT ROUTE] screen. 5-38 How do I program a destination? INV1870 INV1871 INV1872 4. The map screen will be displayed for adjusting. Use the joystick to adjust the location. INFO: When you move the joystick, the Adjust key will be displayed. 5. The new destination (waypoints) will be set. TO DELETE A DESTINATION 1. To delete the destination (waypoint), choose the destination (waypoint) in step 3 and select the Delete key. How do I program a destination?5-39 ALL CLEAR INV1873 INV1874 INV1868 2. The preset destination (waypoints) will be deleted. 3. INFO: button to return to the To set a new destination (waypoints), refer to "Expert mode categories" or "Easy mode categories" on page 5-2. If you reset the new destination (waypoints), the older destination (waypoints) will be deleted. If you have requested a route calculation, the previous suggested route will be deleted from memory. The destination and waypoint can be deleted at one time. Several keys will be displayed on the right of the screen. Select the Edit Route key. 5-40 How do I program a destination? QUICK STOP INV1875 INV1876 INV1314 2. The [EDIT ROUTE] screen will be displayed. Select the Yes key. The system will display pre-defined POI's (Points of Interest) in the current vicinity of the vehicle and the distances to them. [. . . ] Set the destination to within 1, 100 miles (1, 770 km). This condition is not abnormal. The starting point to the destination is too close. The present location is about 1, 100 miles (1, 770 km) away from the destination. The route is not displayed continuously at waypoints, for example, that are not calculated route from the vehicle's current position. [. . . ]