User manual NITECORE MT40

[. . . ] ® ALL-ROUND Flashlight Expert User Manual Switching ON/OFF Switch ON: Press the button on the tailcap until a “click” is heard. Switch OFF: Press the button at the tailcap until a second time until a “click” is heard. Features • • • • • • LED Premium CREE XM-L U2 LED Maximum output of up to 860 lumens High efficiency current circuit board Maximum runtime of up to 24 hours Two rapid switching modes suit various user requirements. [. . . ] In this mode, lightly and rapidly pressing the switch will cycle through brightness and other functions in the following order: “High-Mid-Low- SOS-Strobe”. Pressing the switch all the way down will save and memorize a desired setting. Tips: Make NITECORE MT40 your perfect multi-task flashlight. Battery Options Primary Lithium battery 18650 Rechargeable Li-ion battery Rechargeable Li-ion battery SIZE Nominal voltage Compatible Y (Recommended) Y (Recommended) Y CR123 18650 RCR123 3V 3. 7V 3. 7V Brightness & Runtime TURBO HIGH MID LOW Stated data has been measured according to the international flashlight 1h30min 3h30min 7h30min 24h testing standards ANSI/NEMA FL1 using 1h30min 2h45min 6h30min 18h30min two quality NITECORE 18650 (3. 7V 2600mAh) 363m (Beam Distance) batteries or four SYSMAX CR123 (3V 1550mAh) batteries under laboratory 33000cd (Peak Beam Intensity) conditions. The data may vary due to individual 1. 5m (Impact Resistant) usage habits and environmental conditions. LUMENS LUMENS LUMENS LUMENS 860 530 280 100 NOTICE NITECORE MT40 flashlights essentially have two modes: Turbo mode (100% output) and custom mode. Turbo mode is accessed by tightening the flashlight head while any of one of the four customizable modes (strobe, low, medium and high) are selected by loosening the head and rapidly pressing the on/off switch to cycle through the modes. A given mode can be saved by simply turn off the light while in that mode. Real-world examples include: When used as a flashlight around the home, the head can be loosened and low level selected in custom mode, providing long runtimes at a lower light intensity. The same flashlight could then be taken out and used a law-enforcement duty light, with user-defined mode set in strobe, making it easy to alternate between turbo mode and strobe with a simple twist of the flashlight head. Maintenance NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop the ANSI FL1 standard of measurement. Product testing data is in accordance with these internationally recognized scientific standards. Operation instructions Battery installation (as the picture shows) 1. Unscrew the tail cap in a counter-clockwise direction. Insert two 18650 batteries or four CR123 batteries with the positive pole pointing forward (toward the light head). WARNING Ensure batteries are inserted with the positive (+) end pointing to the head. The MT40 will not operate with incorrectly inserted batteries. 18650 2×CR123 Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant. IPX-8, 2m (Waterproof AND Submersible) All NITECORE® products are warranted for quality. DOA / defective products can be exchanged for replacement though a local distributor/dealer within the 14 days of purchase. [. . . ] The product(s) is/are damaged by leakage of batteries. For the latest information on NITECORE® products and services, please contact your national NITECORE® distributor or send an email to service@nitecore. com Warranty Service Please follow our facebook for more info: NITECORE Flashlights SYSMAX Industry Co. , Ltd. TEL: FAX: E-mail: Web: Address： +86-20-83862000 +86-20-83882723 info@nitecore. com www. nitecore. com Rm1407-08, Glorious Tower, 850 East Dongfeng Road, Guangzhou, China 510600 Thanks for purchasing NITECORE! [. . . ]