User manual NOKIA 232

[. . . ] DESCRIPTION OF KEYS Use the phone keys as follows: On the side of phone: and Select earpiece volume. ON Press and hold to switch the phone on or off. MENU Selects menu mode. STO Stores information in a memory location. Dials voicemail or favorite number stored in memory location 98. Pressing MENU SEND in a call can send DTMF data. [. . . ] Your phone is designed to work with both carriers. This menu function allows you to program your phone for optimum operation when in your home service area or when away from your home area (this is called roaming). You may select any of the following roaming modes: System A NAM Selected* System B NAM Selected* HOME AREA HOME AREA The phone uses only the home area and home system. BOTH SYSTEMS BOTH SYSTEMS The phone uses either system A or B, whichever is the stronger signal. HOME TYPE A NON-HOME TYPE B HOME TYPE B NON-HOME TYPE A The phone uses only the home system. The phone uses only the non-home system. 35 *The home system depends on the current NAM selection; refer to `NAM Select (Menu 7)', page 39. When you buy your phone, you may register (receive a phone number) with either or both of your local carriers. Contact the office of your home cellular phone company for information about the roaming agreements they have with other cellular phone companies. In some areas, roaming telephones are automatically recognized by the cellular system. In other areas, you must contact the cellular phone operator before the system can recognize your phone. The company needs to know your telephone number, the ESN (Electronic Serial Number) of your phone, and how you plan to pay for your calls. There is usually an additional charge for roaming calls. NOTE: The ESN can be found on the phone's label inside the battery compartment. To select the roaming mode: ³ Press MENU 1. (Wait for the currently selected option to appear. ) · » Press or prefer. to select the roaming mode you Press STO to confirm the setting. The phone will use this setting in a few seconds. For the function of the ROAM indicator on the display, refer to `Display Indicators', page 7. Ringing Type (Menu 2) This function allows you to select, and demonstrate, any one of the five types of ringing tones: ­ the standard tone (STANDARD), or ­ one of four optional tones (OPTIONAL 1, 2, 3 or 4). To select the ringing tone: ³ Press MENU 2. (Wait for the currently selected option to appear. ) · » Press or to choose the type you prefer. Press STO to confirm the setting. 36 Call Timers (Menu 3) This function allows you to check the duration of the calls you have made, on the currently-selected NAM (phone number), and to reset the call timers. You may display three call timers; shown in hours, minutes and seconds: ­ Duration of the current or last call (LAST . . ­ Duration of all calls you have made on the currently active NAM except the current call (TOTAL . . ­ Non-resetable timer showing duration of all calls you have made on the currently active NAM except the current call (LIFE . . . . You can use the RESET TIMERS option to reset the LAST and TOTAL timers. To display the call timers, or reset the call timers: ³ Press MENU 3. The duration of the current or last call will be displayed (LAST . . · Press once to display TOTAL, twice to display LIFE, and three times to display RESET TIMERS. [. . . ] The Ignition Sense function is not user-selectable. It is always enabled when the ignition sense line is connected. Car Radio Mute This function mutes the car radio when a call is started or when the phone rings to indicate an incoming call. When the call or the ringing tone ends, the car radio is unmuted and regains its original volume level. [. . . ]