User manual NOKIA 3200

[. . . ] User's Guide for Nokia 3200 9356881 Issue 2 DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RH-30 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www. nokia. com/phones/declaration_of_conformity/. Copyright © 2004 Nokia. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia, Nokia Connecting People, Xpress-on and Pop-Port are trademarks or registered trademarks of Nokia Corporation. [. . . ] · To activate the profile for a certain amount of time, select Timed and set the end time. When this time expires, the previous profile that was not timed, becomes active. · To change the profile settings, select Personalise. Select the setting you want to change and make the change. For information on the settings, see Tone settings on page 66. With Profile name you can rename the selected profile. The name of the currently active profile is shown in standby mode, except when the General profile is active. If the profile is timed, is shown in front of its name. Tip: To change the profile quickly in standby mode, press the power key and select the profile you want to activate. Copyright © 2004 Nokia. All rights reserved. 65 Tone settings You can change the tone and vibrator settings of the currently selected profile. The same settings can also be found in the Profiles menu, see page 65. To access this menu: Press Menu in standby mode, and select Settings and Tone settings. Select · Incoming call alert to choose how the phone notifies you of an incoming voice call. The options are Ringing, Ascending, Ring once, Beep once and Off. · Ringing tone to select the tone that rings when you receive a voice call. To select a ringing tone from the Gallery menu, select Open gallery. A sound clip recorded with the Voice recorder function (see page 84) can also be set as a ringing tone. · Ringing volume to select the volume level for the ringing tones and message alert tones. · Vibrating alert to set the phone to vibrate when you receive a call or message. The vibrating alert does not work when the phone is connected to a charger, desktop stand or car kit. · Message alert tone to select the tone you hear when you receive a message. To select the tone from the ringing tone list, select Ringing tone and the desired tone. [. . . ] When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so. Certification information (SAR) THIS MODEL PHONE MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radiofrequency (RF) energy recommended by The Council of the European Union. [. . . ]