User manual NOKIA 500 AUTO NAVIGATION

[. . . ] Nokia 500 Auto Navigation User Guide 9206144 Issue 1 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this PD-14 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/EEC), Annex I, paragraph 6. 5, 6. 6, 6. 8 and 6. 9. A copy of the Declaration of Conformity can be found at http://www. nokia. com/ phones/declaration_of_conformity/. At the time of production of this document, the FM transmitter part of this product is intended for use in the following countries: Belgium, Czech Republic, Denmark, Estonia, Finland, Germany, Iceland, Liechtenstein, Luxembourg, Norway, Portugal, Spain, Switzerland, Sweden, Turkey, United Kingdom. [. . . ] To define the settings for the FM transmitter, tap FM transmitter. You can access the settings also in the Music application by tapping . · To turn the FM transmitter on or off, tap the current setting in Activate, and tap the current setting until the desired option is displayed. · To save the frequencies that you want to use with the transmitter, tap the current setting in Adjust channels. Tap the desired memory location (channel) and . Enter the frequency using the displayed keypad, or tap + or -. · To select the frequency that you want to use with the transmitter, tap the current setting in Adjust channels and the desired channel. Due to legal requirements, the FM transmitter automatically turns off if there is no music or a call active for 1 minute. Some countries may have restrictions on the use of FM transmitters. Check with your local authorities for more information. You may also find related information at www. nokia. com or on your local Nokia website. Reset To reset the device if it stops functioning, although it is charged, press the reset key at the base of the device. The reset does not delete the device settings. 24 Navigator 4. Navigator The navigation device has an internal GPS receiver that you can use to detect your current position and for turn-by-turn navigation. When you switch on the device, the map view of the Navigator application is displayed. To use navigation, press the menu key, and tap Navigator. The device receives signals from a number of GPS satellites to determine your current position. For GPS satellite navigation, place the device in a location with an unobstructed view to the sky. Establishing a GPS connection may take from a couple of seconds to several minutes. The connection time depends on how well the GPS receiver can receive satellite signals. Establishing the connection takes longer if you have not used GPS for several days or are very far away from the last location you used it. If the quality of the GPS connection is good, is displayed. If the connection is not good enough for navigation, is displayed; in this case, check that the device has an unobstructed view to the sky. [. . . ] Never use any charger that is damaged. 49 Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. [. . . ]