User manual NOKIA 5000

[. . . ] Memory card with adapter 10. Memory card slot 11. Main power switch 12. Mini USB port/charger connector 13. Reset key 3 First use 1. To switch on the device, slide the main power switch to the right. In daily use, use the standby mode instead of switching the device off. To set the device to (or to exit) the standby mode, press and hold the power key for about 3 seconds. [. . . ] Insert the navigation device into the mobile holder (3), and press the device backwards so that the two arms of the holder lock the device in place (4). (To release the device, push the arms. ) To adjust the vertical or horizontal position, use the screws (5) and (6). To charge the internal battery, connect the supplied charger to the mini USB port on the navigation device, and insert the charger plug into the 12 V cigarette lighter socket of your car. To use the TMC (traffic message channel) service with the device, keep the charger connected to the device as the charger includes the TMC antenna. Basic operation Touch screen To use most features of the device, tap the screen with your finger. 5 Important: Avoid scratching the touch screen. Never use a pen or pencil or other sharp objects to write on the touch screen. Open applications from map screen When you switch on the device, the map screen is displayed. This screen shows the map view of the Navigator application. To show or hide the application menu, press the menu key. To open an application from the menu, tap its icon. The device includes the following applications: · Navigator ( ) for GPS navigation · Phone ( ) to make and answer calls using the mobile phone connected to the device · Music ( · Gallery ( · Setup ( ) to play songs saved on the memory card ) to view photos and watch video clips saved on the memory card ) to adjust settings and view information about the device . To return to Navigator from other applications, press the menu key. To return to the previous screen in any application, tap To adjust the volume for the current application, press (or press and hold) the volume up (+) or down (-) key. The status indicators displayed in the upper right corner of the map screen show the status of the GPS, Bluetooth, and TMC connection, and the charge level of the internal battery. Navigator Map When the device has a GPS connection, Navigator shows your current location on a map. Tracking mode When you are not navigating to a destination, Navigator is in the tracking mode. Tap the category and subcategory for the point of interest. Alternatively, tap enter the name of the point of interest, and tap . , A list of found points of interest is displayed. The list is sorted by the distance to the starting point. Tap the desired point of interest and the option that you want to use. Plan a route You can plan your route in advance, also without GPS connection. To plan a route, press the menu key, and tap Navigator > Destination. Select the start point for the route in the same way as a destination, and add it to the route (Via). When you tap Via, Destination list is displayed. To add a waypoint to the 8 route, tap +, and select the location in the same way as a destination. To delete a stopover from the trip, tap the stopover on the list and . After you have set up the route, tap and Routing. [. . . ] · If your phone supports voice dialling with the navigation device, tap Voice dial to call a phone number saved in your phone using voice dialling. · To speed dial a phone number, tap Favourites to access the speed dial list. To make a call, tap the desired contact. To assign a new contact, tap <assign>. [. . . ]