User manual NOKIA 5185I

[. . . ] Nokia 6185 User Guide Draft v8. 0 Final review Note: This User Guide describes functionality planned for the HD983 final product, and may vary from the HD983 prototype provided with this User Guide. Inclusion of items in this User Guide does not imply or guarantee inclusion in the HD983 final product. Nokia Mobile Phones reserves the right to make changes and improvements to HD983 and this User Guide without prior notice. Keys (Power key) Press and hold to turn your phone on or off. Fixed antenna Do not attempt to extend or remove! Para obtener un manual del usuario en espaol favor de llamar o enviar un fax al telfono 1-888-NOKIA2U (1-888-665-4228), fax 813-287-6612. Earpiece Press the scroll keys up or down during a call to adjust the listening volume. (Softkeys) Their current function is displayed above the key; these labels change when accessing the various phone features. (Scroll keys) Scroll through menus, submenus, and the phone book. Press and hold for continuous scrolling. 0HQX 1DPHV Push this key to end a phone call or to return to the start screen. Use this key to dial and answer phone calls. Press this key to select special characters when entering text and numbers. [. . . ] Contact your service provider for details. Network feature setting Call forwarding (page 24), Call waiting (page 28) and Send own number (page 65) are network services available through your service provider or dealer. When you subscribe to any of these services, your service provider or dealer gives you a separate feature code to activate each service. Deactivation codes are used to deactivate each service. Once you store the appropriate code in your phone, the service appears as a menu item. You can then use the menu to 49 Final version 2/15/99 Selecting the NAM for your phone 1. Press Menu 4-4-5 (Settings - Network services - NAM 48 Final version 2/15/99 activate and deactivate these services. Note: These feature codes may already be stored in your phone by your service provider. Check with your service provider to confirm if these codes are already configured in your phone. Note: If your phone has more than one phone number programmed, any feature codes stored will apply only to your primary phone number, or NAM 1. page 49 for details. One-touch dialing This feature allows you to make phone calls quickly and easily with the touch of a button. You must store names and numbers in your phone book (see page 54) before you can use this feature. Then you can assign a name from the phone book to a one-touch dial location using your phone's keys 2 through 8. Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox (see page 75) and for attempting emergency calls (see page 90) to the emergency number programmed into your phone (e. g. 911 or other official emergency number). Press and hold either of these keys to initiate the appropriate call. Storing feature codes 1. Press Menu 4-4-4 (Settings - Network services Network feature setting) At Feature code:, enter the feature code or deactivation code received from your dealer (e. g. 74, 740, etc. ), press OK t 2. 3. to the service that the code applies to and press Select to suboption, then Select (Repeat step as required, based on number of suboptions) (Use step four only for call forwarding options) Assigning one-touch dial locations 1. 2. 4. t Press Names, scroll to E-touch dialing and press Select Scroll to next available empty location, (empty) will appear, then press Assign Scroll to select desired name and press Select Repeat as necessary 5. t to Activate or Cancel, then press OK 3. 4. Network services Some of the features in this menu are network services that require a subscription. See your service provider for details and availability. 4-4-3 Send own caller ID with next call * - See page 65. 4-4-4 Network feature setting - See page 49. * These features will not appear in the menu unless they are activated using Network feature setting. See "Network feature setting" on Calling a number using one-touch dialing Press and hold the key (2 through 8) for a few seconds to call the number in the corresponding one-touch dial location. You can also press the key and then if you prefer. Your phone recalls the phone number from the memory, displays it briefly, then dials it. Changing numbers in one-touch dial list With this feature, you can assign a different number to any one-touch dial location. 1. 2. Press Names, scroll to 1-touch dialing and press Select Scroll to the location you wish to change and press Options 50 Final version 2/15/99 51 Final version 2/15/99 3. [. . . ] The Consumer will be responsible for any expenses related to reinstallation of the Product. e) NMP will repair or authorize the repair of the Product under the limited warranty within 30 days after receipt of the Product by NMP or an NMP authorized service center. If NMP cannot perform repair covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, NMP at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage. f) If the Product is returned to NMP during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. [. . . ]