User manual NOKIA BH-208

[. . . ] Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. [. . . ] Disconnect the Chargers Check the model number of any charger before using it with this headset. The headset is intended for use with the AC-3, AC-4, and DC-4 chargers. Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty and may be dangerous. 4 charger from the headset and the wall outlet. The fully charged battery has power for up to 6 hours and 30 minutes of talk-time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power falls low, the headset beeps and the red indicator light starts to flash. Pair the headset 1. Ensure that your phone is switched on and the headset is switched off. Press and hold the power key until the green indicator light starts to flash quickly. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices. 5 Switch the headset on or off To switch on, press and hold the power key until the headset beeps and the green indicator light is displayed. To switch off, press and hold the power key until the headset beeps and the red indicator light is displayed briefly. Basic use Place the headset on the ear Slide the earloop behind your ear (9), and point the headset toward your mouth. Carefully bend the earloop around your ear for the best fit (10). To use the headset on the left ear, gently detach, rotate, and attach the earloop as shown in Figures 11 and 12. progress, and proceed as described in the user guide of your phone. To answer or end a call, press the answer/end key. To reject an incoming call, press the answer/end key twice. [. . . ] High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. [. . . ]