User manual NOKIA BH-213

[. . . ] Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with your Nokia dealer for details. 2 © 2008 Nokia. All rights reserved. Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. [. . . ] Ensure that your phone is on and the headset is off. Press and hold the multifunction key (for about 5 seconds) until the green indicator light starts to flash quickly. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the 5 Switch on or off To switch on, press and hold the multifunction key for about 2 seconds. The headset beeps, and the green indicator light is displayed. The headset tries to connect to a paired phone. © 2008 Nokia. All rights reserved. connection separately after pairing. When the headset is connected to your phone and is ready for use, the green indicator light flashes slowly. Basic use Place the headset on the ear To use the headset with the earloop, attach the earloop to it (8). To detach the earloop, gently pull it from the headset (9). Slide the earloop behind your ear (10), and point the headset toward your mouth. Carefully bend the earloop around your ear for the best fit (11). To change the earplug, pull the current earplug from the earpiece, and push the new earplug over the earpiece in the same position. Calls To make a call, use your phone in the normal way when the headset is connected to it. To redial the number you last called (if your phone supports this feature with the headset), when no call is in progress, press the multifunction key twice. To activate voice dialling (if your phone supports this feature with the headset), when no call is in progress, press and hold the multifunction key for about 2 seconds. Proceed as described in the phone user guide. 6 © 2008 Nokia. All rights reserved. To answer or end a call, press the multifunction key. To adjust the volume during a call, slide the volume key up or down. To mute or unmute the microphone during a call, briefly press the middle of the volume key. To switch a call from the headset to a compatible phone, press and hold the multifunction key for about 5 seconds (the headset switches off). To switch the call back to the headset, press the multifunction key for about 2 seconds (the headset switches on). Clear settings or reset To delete the pairings from the headset or reset the headset, switch off the headset, and press and hold the multifunction key for over 8 seconds. Troubleshooting If you cannot connect the headset to your compatible phone, check that the headset is charged, switched on, and paired with the phone. Battery information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. [. . . ] · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. · Do not drop, knock, or shake the device. [. . . ]