User manual NOKIA BH-300

[. . . ] Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with your Nokia dealer for details. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. [. . . ] Connect the charger to a wall different mobile phones or other outlet. Connect the charger cable to usage settings, usage styles, and the headset. It When battery power is low, the may take a while before headset beeps, and the red charging starts. If charging does indicator light starts to flash. not start, connect the charger again and retry. Charging the Switch the headset on or off 4. Enter the Bluetooth passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. Pair the headset If the pairing is successful, the headset beeps and appears in the 1. Switch on your phone and the phone menu where you can view headset. When the headset is on the phone, and set the phone connected to a paired phone and is to search for Bluetooth devices. Select the headset from the list light flashes slowly. To switch on, press and hold the power key until the green indicator light starts to flash. To switch off, press and hold the power key until the red indicator light is displayed briefly. Basic use Place the headset on the ear The headset has an earloop attached around it. To use the headset without placing the earloop over the ear, plug the earpiece into your ear. To use the headset with the earloop on the right ear, detach the earloop from the right of the headset (8) when the back of the headset is facing you; to use the headset on the left ear, detach the earloop from the left. Slide the earloop behind your ear (8), and point the headset toward your mouth. attach the new earloop by inserting the catches at the ends of the earloop into the slots in the headset. Carry the headset in the strap You can wear the headset on your neck using the supplied strap. To fix the headset to the strap, insert the headset into the catch (9), and gently push it downwards (10) until it locks into place. To detach the headset, slide it downwards through the catch. Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. To change the earloop, detach it If your phone supports last number from both sides of the headset, and redialing with the headset, press Change the earloop the answer/end key twice briefly when no call is in progress. [. . . ] · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. · Do not drop, knock, or shake the device. [. . . ]