User manual NOKIA BH-310

[. . . ] 0 2 Introduction About your headset With the Nokia Bluetooth Mono Headset BH–310, you can handle calls hands-free, even when using two phones at the same time. The surface of this product is nickel-free. Warning: This product may contain small parts. Keep them out of the reach of small children. [. . . ] 7 If the phone does not support NFC, pair the headset manually. Pair the headset manually 1 Make sure your headset is switched off and your compatible phone is on. 2 If you've never paired the headset with a device, or you've cleared the pairings, switch the headset on. If you've previously paired your headset with another device, press and hold for 5 seconds. Pairing mode is switched on, and a blue indicator light starts to flash quickly. 3 Within 3 minutes, switch Bluetooth on in your phone, then set it to search for Bluetooth devices. For details, see the user guide of the phone. 4 On your phone, select the headset from the list of found devices. In some devices, you may need to make the connection separately after pairing. Pair and connect the headset to two devices When you have paired and connected your headset with one phone, you can connect your headset to another phone, and manage calls from, for example, both your personal and your work phone at the same time. 1 2 3 4 Make sure Bluetooth is switched on in both phones. To switch the headset off, press and hold Press and hold for 5 seconds to switch pairing mode on, then pair the headset with the second phone. 8 Tip: If the other phone has NFC, just touch the NFC area of the headset with the NFC area of the phone. Make calls Make and receive calls To make and receive calls using your headset, you need to connect it to your phone. Make a call Make a call in the normal way. Answer a call Remove the headset from the clip. Tip: If the headset is not in the clip, press End a call Put the headset in the clip. Tip: To end a call, you can also press Decline a call twice. Press Switch a call between your headset and phone for 2 seconds. Press and hold When you're not in a call, you can redial the last called number or use voice dialling, if your phone supports these features with the headset. Press Use voice dialling for 2 seconds, then follow the instructions in the user guide of your Press and hold phone. Handle calls from two phones If your headset is connected to two phones, you can handle calls from both at the same time. [. . . ] Do not dispose of batteries in a fire as they may explode. Use the charger for its intended purpose only. Improper use or use of unapproved chargers may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. If you believe the charger is damaged, take it to a service centre for inspection before continuing to use it. [. . . ]