User manual NOKIA BH-600

[. . . ] Other product and company names mentioned herein may 3 Introduction Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. [. . . ] Do not attempt to remove the battery from the device, as you may damage the device. The indicator light Get started 220is continuously displayed during charging. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 7 hours of talktime or up to 220 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power is low, the indicator light flashes fast. Switch the headset on or off To switch on, press and hold the multifunction key until the indicator light turns on and the headset beeps. To switch off, press and hold the multifunction key until the indicator light rapidly flashes four times and then turns off. Pair the headset 1. When the headset is off, press and hold the multifunction key until the indicator light is continuously displayed. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If the pairing is successful, the indicator light starts to flash slowly, and the headset appears in the phone menu where you can 5. Enter the passcode 0000 to view the currently paired pair and connect the headset to Bluetooth devices. In some phones The headset is now ready for use. Select the headset from the list of found devices. Basic use Wear the headset Slide the earloop behind your ear (8), and push or pull the earloop to set its length. To use the headset on the left ear, gently flip (9) and rotate the earloop (10). Basic use Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. If your phone supports last number redialing with this device, press the multifunction key when no call is in progress. If your phone supports voice dialing with this device, briefly press the multifunction key when no call in progress, and proceed as described in the user guide of your phone. To answer or end a call, briefly press the multifunction key. If you do not want to answer the call, press the multifunction key. To answer another call during a call (and put the active call on hold) or switch between the two calls, press the multifunction key. Adjust the earphone volume Press the plus key (+) to increase or the minus key (-) to decrease the volume. Mute the microphone Press both volume keys at the same time during a call. When muted, the headset beeps at regular intervals. [. . . ] Its moving parts and electronic components can be damaged. · Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. [. . . ]