User manual NOKIA BH-904 CARACTERISTIQUES TECHNIQUES

[. . . ] Nokia Bluetooth Headset BH-904 User Guide 9209964 Issue 1 EN DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HS-101W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/ declaration_of_conformity/. © 2008 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. [. . . ] The fully charged battery has power for up to 8 hours of talk time or up to 160 hours of standby time. To check the battery charge when the headset is not connected to a charger, briefly press the power key when the headset is switched on. If the indicator light is green, the charge level is sufficient. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery. When the battery is discharged, the headset beeps about every 5 minutes, and the red indicator light flashes once after any other indicator light. Switch the headset on or off To switch on, press and hold the power key for about 2 seconds. The headset beeps, and the green indicator light is displayed. The headset 7 Get started tries to connect to one or two last connected devices. When the headset is connected to a device and is ready for use, the blue indicator light flashes slowly. If the headset has not been paired with a device, it automatically enters the pairing mode (see "Pair and connect the headset", p. To switch off, press and hold the power key for about 2 seconds. The headset beeps, and the red indicator light is briefly displayed. If the headset is not connected to a device within 30 minutes, it switches off automatically. Pair and connect the headset You can pair the headset with up to eight devices, but you can connect it to only up to two devices at a time. Ensure that your mobile device is on and the headset is off. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the blue indicator light starts to flash quickly. To pair the headset if it has been previously paired with another device, ensure that the headset is switched off, and press and hold the power key for about 5 seconds until the blue indicator light starts to flash quickly. Activate the Bluetooth feature on your device, and set it to search for Bluetooth devices. For details, see the user guide of your device. Select the headset (Nokia BH-904) from the list of found devices. If your device asks for a Bluetooth passcode, enter 0000 to pair and connect the headset to the device. In some devices, you may need to make the connection separately after pairing. [. . . ] The amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time. 14 Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. [. . . ]