User manual NOKIA BLUETOOTH HEADSET BH-100

[. . . ] Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. [. . . ] If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 1 hour and 30 minutes. When the battery is fully charged, the indicator light turns green. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 6 hours and 30 minutes of talktime or up to 150 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power falls low, the headset beeps and the red indicator light starts to flash. Switch the headset on or off To switch on, press and hold the power key until the headset beeps and the green indicator light is displayed. To switch off, press and hold the power key until the headset beeps and the red indicator light is displayed briefly. Pair the headset 1. Ensure that your phone is switched on and the headset is switched off. Press and hold the power key until the green indicator light starts to flash quickly. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may 5 need to make the connection separately after pairing. You only need to pair the headset with your phone once. If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices. The headset is now ready for use. Basic use Place the headset on the ear The headset has an earloop attached around it. To use the headset without placing the earloop over the ear, plug the earpiece into your ear. To use the headset with the earloop on the right ear, detach the earloop from the right of the headset (8) when the back of the headset is facing you; to use the headset on the left ear, detach the earloop from the left. Slide the earloop behind your ear (9), and point the headset toward your mouth (10). 6 Change the earloop The headset may be supplied with earloops in different colors. [. . . ] · Do not store the device in cold areas. When the device returns to 8 its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. · Do not drop, knock, or shake the device. [. . . ]