User manual NOKIA BLUETOOTH HEADSET BH-205

[. . . ] The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. [. . . ] The ENGLISH from the device, as you may damage the device. Connect the charger cable to the charger connector on the headset. The red indicator light is displayed while charging. It may take a while before charging starts. If charging does not start, connect the charger again, and retry. Charging the battery fully may take up to 2 hours. When the battery is fully charged, the red indicator light turns off. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 10 hours of talk time or up to 240 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power is low, the indicator light flashes quickly and the headset beeps every 20 seconds. Switch the headset on or off To switch on, press and hold the multifunction key until the headset beeps and the blue indicator light is displayed. To switch off, press and hold the multifunction key until the headset beeps and the red indicator light is displayed briefly. Pair the headset 1. Press and hold the volume up (+) key and the volume down (-) key at the same time until the blue and red indicator lights start to alternate. ENGLISH 3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If the pairing is successful, the headset beeps once and appears in the phone menu where you can view the currently paired Bluetooth devices. The headset is now ready for use. Basic use Wear the headset Slide the earloop behind your ear, and point the headset toward your mouth. To use the headset on the left ear, gently detach (7), flip, and attach (8) the earloop. If your phone supports last number redialing with the headset, press and hold the volume up key when no call is in progress. [. . . ] · Do not use or store the device in dusty, dirty areas. Its moving parts · and electronic components can be damaged. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. [. . . ]