User manual NOKIA BLUETOOTH HEADSET BH-218

[. . . ] This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. © 2010 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. [. . . ] Remove the earpiece from the storage You can pair the headset with up to slot. The headset beeps, and the green eight devices, but you can connect it indicator light flashes slowly while the to a maximum of two devices at a headset tries to connect to the last or time. two last connected devices. ENGLISH If voice prompts are activated, the headset guides you with audible notifications when you pair and connect it. To pair and connect the headset to a device: 1. Make sure your mobile device is switched on and the headset is off. If the headset has not been previously paired with a device, switch on the headset. The headset enters pairing mode, and the blue indicator light starts to flash quickly. If the headset has been previously paired with a device, to activate pairing mode, make sure the earpiece is placed in the storage slot, and remove the earpiece from the slot while you press and hold the answer/end key for about 5 seconds. The blue indicator light starts to flash quickly. Within about 3 minutes, activate Bluetooth on your device, and set it to search for Bluetooth devices. For details, see the user guide of your mobile device. Select the headset from the list of found devices. If necessary, enter the passcode 0000 to pair and connect the headset to your device. In some devices, you may need to make the connection separately after pairing. When the headset is connected to at least one device and is ready for use, the blue indicator light flashes slowly. To manually connect the headset to the last used device, press and hold the answer/end key for about 2 seconds (when no other device is connected), or make the connection in the Bluetooth menu of the device. ENGLISH You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, modify the paired device settings in the Bluetooth menu. Basic use Select the earpad The headset may be provided with different sized earpads. Select the earpad that fits the best for your ear. To change the earpad, pull the current earpad from the earpiece, and push the new earpad into place. place the earpiece into the storage slot. When the earpiece is in the slot, the headset is switched off. When you remove the earpiece from the slot, the headset automatically switches on. [. . . ] If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. Paint can clog the moving parts and prevent proper operation. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. [. . . ]