User manual NOKIA BLUETOOTH HEADSET BH-304

[. . . ] Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other © 2007 Nokia. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. [. . . ] When the battery is fully charged, the indicator light turns to green. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 6 hours and 30 minutes of talk time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power falls low, the headset beeps, and the red indicator light starts to flash. Switch the headset on or off To switch on, press and hold the power key until the headset beeps and the green indicator light is displayed. To switch off, press and hold the power key until the headset beeps and the red indicator light is displayed briefly. Pair the headset 1. Ensure that your mobile device is switched on and the headset is switched off. Press and hold the power key until the green indicator light starts to flash quickly. Activate the Bluetooth feature on the mobile device, and set the device to search for Bluetooth devices. Select the headset from the list of found devices. ENGLISH 5. Enter the passcode 0000 to pair and connect the headset to your device. In some devices you may need to make the connection separately after pairing. You only need to pair the headset with your device once. If the pairing is successful, the headset beeps and appears in the device menu where you can view the currently paired Bluetooth devices. Basic use Place the headset on the ear The headset is ready to be used on your right ear. Slide the earloop over your ear (9), and point the headset toward your mouth (10). To use the headset on the left ear, rotate the earloop so that the loop is to the left of the "Nokia" logo (11). cover starting from the top (12), and push the new cover into place. Call handling To make a call, use your mobile device in the normal way when the headset is connected to the device. If your device supports last number redialing with the headset, press the answer/end key twice while no call is in progress. If your device supports voice dialing with the headset, press and hold the answer/end key when no call in Change the cover The headset may be supplied with front covers in different colors. To change the cover, pull the current ENGLISH progress, and proceed as described in the user guide of your device. To answer or end a call, press the answer/end key. To reject an incoming call, press the answer/end key twice. [. . . ] Rough handling can break internal circuit boards and fine mechanics. ENGLISH · Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Paint can clog the moving parts and prevent proper operation. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. [. . . ]