User manual NOKIA BLUETOOTH HEADSET BH-608 IN ENGLISH

[. . . ] This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Introduction ENGLISH Bluetooth wireless technology With the Nokia Bluetooth Headset BH-608, you can make and answer calls hands-free with your compatible mobile device. [. . . ] Ensure that your mobile device is switched on and the headset is off. If the headset has not been previously paired with a device, switch on the headset. The headset enters pairing mode, and the blue indicator light starts to flash quickly. If the headset has been previously paired with a device, ensure that the headset is switched off, and press and hold the power key for about 5 seconds until the blue indicator light starts to flash quickly. Within about 3 minutes, activate the Bluetooth feature on your device, and set it to search for Bluetooth devices. For details, see the user guide of your mobile device. Select the headset from the list of found devices. If necessary, enter the passcode 0000 to pair and connect the headset to your device. In some devices, you may need to make the connection separately after pairing. When the headset is connected to at least one device and is ready for use, the blue indicator light flashes slowly. To manually connect the headset to the last used device, press and hold the answer/end key for about 2 seconds (when no other device is ENGLISH connected), or make the connection in the Bluetooth menu of the device. You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. ENGLISH Basic use Change the earpad The headset may be provided with different sized earpads. Select the earpad that fits the best and is the most comfortable for your ear. To change the earpad, pull the current earpad from the earpiece, and push the new earpad into place. Adjust volume between the headset and the clip (11). Wear the headset Use the clip to attach the headset to your clothing (12). To use the headset for calling, gently push the earpiece into your ear. To have the earpiece within easy reach when you are not using the headset, insert the earpiece cable To adjust the volume, press the volume up or down key. To adjust the volume quickly, press and hold the key. The selected volume level is saved for the device that is currently connected to the headset. Calls To make a call, use your mobile device in the normal way when the headset is connected to it. To redial the number you last called (if your mobile device supports this feature with the headset), when no call is in progress, press the answer/ end key twice. To activate voice dialling (if your mobile device supports this feature with the headset), when no call is in progress, press and hold the answer/ end key for about 2 seconds. Proceed as described in the user guide of the mobile device. [. . . ] Paint can clog the moving parts and prevent proper operation. · Do not store the device in high or cold temperature. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. When the device warms to its normal temperature from a cold temperature, moisture can form · These suggestions apply equally to your device or any accessory. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. [. . . ]