User manual NOKIA BLUETOOTH HEADSET BH-804

[. . . ] Nokia Bluetooth Headset BH-804 User Guide 9210506 Issue 1 EN DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-804 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/declaration_of_conformity/. © 2008 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. [. . . ] When the battery is fully charged, the green indicator light is displayed. Remove the headset from the desk stand or remove the adapter. Disconnect the charger from the wall outlet. The battery can also be charged through the USB port of a compatible PC using the Nokia Connectivity Cable CA-101 (sold separately). Connect one end of the cable to the desk stand or charger adapter and the other end to the USB port on the PC. The fully charged battery has power for up to 4 hours of talk time or up to 150 hours of standby time. When the battery is discharged, the headset beeps about every minute, and the red indicator light flashes. Switch the headset on or off To switch on, press and hold the multifunction key for about 2 seconds. The headset beeps, and the green indicator light is displayed. The headset first tries to connect to the last used mobile device and then, if the connection fails, to one of the other paired devices. When the headset is connected to a device and is ready for use, the blue indicator light flashes slowly. If the headset has not been paired with a device, it automatically enters the pairing mode (see "Pair the headset", p. To switch off, press and hold the multifunction key for about 4 seconds. The headset beeps, and the red indicator light is briefly displayed. If the 9 Get started headset is not connected to a device within about 30 minutes, it switches off automatically. Pair the headset 1. Ensure that your mobile device is on and the headset is off. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the blue indicator light starts to flash quickly. To pair the headset if it has been previously paired with another device, ensure that the headset is switched off, and press and hold the multifunction key (for about 4 seconds) until the blue indicator light starts to flash quickly. Activate the Bluetooth feature on your device, and set it to search for Bluetooth devices. For details, see the user guide of your device. Select the headset (Nokia BH-804) from the list of found devices. Enter 0000 to pair and connect the headset to your device, if your device asks you to do so. [. . . ] To switch the call back to the headset, switch on the headset (and connect it to your paired device), or press and hold the multifunction key for about 2 seconds (when the headset is switched on). The 16 Battery information amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time. 17 Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. [. . . ]