User manual NOKIA BLUETOOTH STEREO HEADSET BH-103

[. . . ] Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with your Nokia dealer for details. [. . . ] The use of any other types may invalidate any approval or warranty, and may be dangerous. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Charge the battery Before charging the battery, carefully read "Battery information, " p. Connect the charger to a wall outlet. 9 Get started 2. Connect the charger cable to the charger connector. The red indicator light is displayed during charging. Charging the battery fully may take up to 1 hour 40 minutes. When the battery is fully charged, the green indicator light is displayed. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 7 hours of talk time, up to 150 hours of standby time, or up to 6 hours of music playing time. To check the battery charge, briefly press the multifunction key when no call is in progress. If the indicator light is green, the charge level is sufficient. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery. When the battery is discharged, the headset beeps about every 5 minutes. 10 Get started Switch on or off To switch on, press and hold the multifunction key for about 2 seconds. The headset beeps, and the green indicator light is displayed. The headset tries to connect to the last used phone and music device, if any. To switch off, press and hold the multifunction key for about 4 seconds. The headset beeps, and the red indicator light is briefly displayed. Pair the headset If your phone supports the A2DP Bluetooth profile and has a music player feature, you can use the phone to make and receive calls, and to play music with the headset. Ensure that your phone or music device is on and the headset is off. Press and hold the multifunction key (for about 4 seconds) until the green indicator light starts to flash quickly. 11 Get started 3. Activate the Bluetooth feature on your phone or music player, and set it to search for Bluetooth devices. Select the headset from the list of found devices on your phone or music player. [. . . ] The following suggestions will help you protect your warranty coverage. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. · Do not use or store the device in dusty, dirty areas. [. . . ]