User manual NOKIA BLUETOOTH STEREO HEADSET BH-108

[. . . ] This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. © 2010 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. [. . . ] Make sure your mobile device is indicator light is displayed. If the headset has not been used device. When the headset is previously paired with a device, connected to a device and is ready for ENGLISH switch on the headset. The headset enters pairing mode, and the green indicator light starts to flash quickly. If the headset has been previously paired with a device, make sure the headset is switched off, and press and hold the multifunction key for about 5 seconds until the green indicator light starts to flash quickly. Within about 3 minutes, activate the Bluetooth feature on your device, and set it to search for Bluetooth devices. For details, see the user guide of your mobile device. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your device. In some devices, you may need to make the connection separately after pairing. When the headset is connected to your device and is ready for use, the green indicator light flashes slowly. To manually connect the headset to the last used device, press and hold the multifunction key for about 2 seconds, or make the connection in the Bluetooth menu of your device. You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, modify the paired device settings in the Bluetooth menu. ENGLISH Basic use Place the headset on the ear To activate voice dialling (if your mobile device supports this feature with the headset), when no call is in progress, press and hold the multifunction key for about 2 seconds. Proceed as described in the user guide of the mobile device. To answer or end a call, press the multifunction key. To adjust the volume, use the volume controls on the connected device. Calls To switch a call from the headset to To make a call, use your mobile device a compatible device, press and hold in the normal way when the headset is the multifunction key for about connected to it. To redial the number you last called To switch the call back to the headset, (if your mobile device supports this press and hold the multifunction key feature with the headset), when no for about 2 seconds, or switch on call is in progress, press the the headset. The headset is ready to be used on the right ear. To use the headset on the left ear, attach the earloop to the headset so that it is to the left of the Nokia logo (9). Slide the earloop behind your ear (7), and gently push the earpiece against your ear. [. . . ] · Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Only use a soft, clean, dry cloth to clean the surface of the device. Paint can clog the moving parts and prevent proper operation. These suggestions apply equally to your device, charger, or any accessory. [. . . ]