User manual NOKIA BLUETOOTH STEREO HEADSET BH-905I

[. . . ] Nokia Bluetooth Stereo Headset BH-905i with active noise cancellation User Guide 9222807 Issue 1 EN DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-905i product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/ declaration_of_conformity/. © 2010 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. [. . . ] Even if Bluetooth connectivity is deactivated, you can use the headset for handling calls and listening to music through the supplied audio cables. Activate To activate Bluetooth connectivity, press and hold the multifunction key for about 2 seconds. The headset beeps, and the Bluetooth indicator light briefly flashes green. The headset tries to connect to the last used mobile device that supports the HFP Bluetooth profile and the last used music player that supports the A2DP profile, if the same device does not support both profiles. When the headset is connected to the device and is ready for use, the Bluetooth indicator light flashes blue slowly. If the headset has not been previously paired with any device, it automatically enters pairing mode. See also "Pair and connect the headset to a Bluetooth device", p. 10. Deactivate To deactivate Bluetooth connectivity, press and hold the multifunction key for about 5 seconds. The headset beeps, and the Bluetooth indicator light briefly flashes red. If the headset is not connected to a Bluetooth device within about 30 minutes, the headset deactivates Bluetooth connectivity automatically. Bluetooth connectivity is also deactivated if you connect the CA-143U or CA-182U audio cable to the headset. 9 Get started Pair and connect the headset to a Bluetooth device If your mobile device supports the A2DP Bluetooth profile and has a music player feature, you can use the device to also play music through the headset. If your mobile device does not support the A2DP profile, you can separately pair the headset with the mobile device and a music player that supports this profile. If you have paired and connected the headset with your mobile device, disconnect the headset from it before pairing the headset with the music player. Ensure that your mobile device or music player is switched on. To pair the headset if it has not been previously paired with a device, activate Bluetooth connectivity on the headset. To manually connect the headset to the last used device that supports the HFP Bluetooth profile or the HFP and A2DP profiles, start the connection in the Bluetooth menu of your device, or press and hold the multifunction key for about 2 seconds. You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. Troubleshooting If you cannot connect the headset to your compatible Bluetooth device, do the following: · Ensure that the headset is charged. 11 Get started · Ensure that Bluetooth connectivity is activated on the headset and the other device and the headset is paired with your device. · Ensure that the CA-143U or CA-182U audio cable is not connected to the headset. · Ensure that the headset is within 10 metres (33 feet) of your device and that there are no obstructions between the headset and the device, such as walls, or other electronic devices. See also "Clear settings or reset", p. Basic use Place the headset over the head Turn the speaker pads towards each other, and place the headset over your head so that the pads rest comfortably on your ears. Place the pad indicated with L on the left ear and the pad with R on the right ear. [. . . ] Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, allow it to dry completely. · Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged. [. . . ]