User manual NOKIA C111

[. . . ] Nokia C110/C111 Wireless LAN Card User's guide For your safety Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user's guide. Road safety comes first Do not use the wireless LAN card while driving; park the vehicle first. Interference All wireless LAN cards may receive interference, which could affect performance. Hospitals and aircraft Wireless LAN cards can cause interference. Observe restrictions for use in these areas. Switch off when refueling Do not use the wireless LAN card at a refueling point. [. . . ] To store data on a smart card: 1 Slide the smart card into the smart card slot of the Nokia C110/C111. Make sure 2 3 4 5 that the metal contacts of the smart card are facing down and that the beveled corner is on the right. Insert the wireless LAN card in your computer and start the Nokia C110/C111 program. In the Smart card area click Add/Remove. Select the items on the left to be copied to the smart card. Click the arrow button pointing to the right. If you want to remove items from the smart card, select the desired items on the right and click the arrow button pointing to the left. You can type additional information about the smart card in the Smart card description text box. Click OK to save the selected items on the smart card. Note: Profiles are copied to a smart card when the Keep data after storing on smart card check box is selected. If this check box is cleared, the selected profiles will be removed - instead of being copied - from the system to a smart card. If you want to empty the contents of a smart card, click Erase All. Note that all items on a smart card will be removed, including the smart card description. If you want the program to re-read the contents of a smart card, click Reload. Creating installation disks The system administrator can create installation disks which contain all the necessary settings needed for accessing a wireless LAN. The custom installation package can also be saved on a hard disk. The installation disk can be used for distributing profiles. All the desired settings and profiles can be copied to the installation disk, which then offers an end user quick access to a wireless LAN. The end user does not have to configure settings in order to be able to connect to a network. To generate an installation disk: 35 1 On the Administrator page, in the Installation disk area, click Create. 2 The Installation Disk dialog box opens. The Profiles available list contains the names of all the profiles found in the system registry. Select a profile you want to save on the installation disk and click the arrow button pointing to the right. Note: General settings are automatically copied to a disk, and do not have to be selected separately like profiles. The name of the selected profile is added to the list on the right. [. . . ] Network name String of up to 32 alphanumeric characters comprising the name of the logical group to which the wireless station belongs. Operating mode Type of communication that must be selected when using a wireless LAN card. The two operating modes available for the Nokia C110/C111 are ad hoc and infrastructure. PIN code (4 to 8 digits) is an access code for protecting a smart card against unauthorized use. [. . . ]