User manual NOKIA CAMERA PT-6

[. . . ] You can use the flash to take pictures of a subject up to 3 meters away. You can use the LED to record video clips of subjects no further away than 0. 5 meter. Do not use the flash on people or animals at close range. 3 English Introduction Note that the flash is only meant for use in poor lighting conditions or the dark. If you use the flash in normal indoor lighting or in daylight, some of your photos may be overexposed. [. . . ] More detailed information is provided in the user guide of your own phone. Do not use this user guide in place of the user guide for the phone, which provides important safety and maintenance information. 4 Getting started 2. Getting started Overview English 5 1. Status LED indicator Getting started To insert the battery, open the battery cover, put the battery in (the required polarity is printed on the cover), and close the cover. When the indicator light is red, the battery must be replaced. Using Nokia Camera Flash 1. Connect Nokia Camera Flash to the phone Pop-Port. To take a picture, see the user guide for the phone. The indicator light blinks green while the flash charges. When the light stops blinking and remains a steady green, you can take a picture. To record a video, see the user guide for the phone. Do not cover the flash while using it. 6 Troubleshooting 3. Short-circuiting the terminals may damage the battery or the connecting object. 9 English Battery information Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Dispose of batteries according to local regulations. Do not dispose as household waste. 10 CARE AND MAINTENANCE CARE AND MAINTENANCE Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. · Do not use or store the device in dusty, dirty areas. [. . . ] · Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. · Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. [. . . ]