User manual NOKIA CAR KIT CK-1W

[. . . ] Diversion contrary to law is prohibited. 9234157 Issue 1 2 For your safety For your safety Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user's guide. ROAD SAFETY COMES FIRST Obey all local laws. [. . . ] microphone MP-2, for in-car installation (optional) 9. Antenna coupler to connect an external antenna when using a phone holder (optional) 10. Active mobile phone holder to connect a compatible mobile phone (sold separately) 11. Passive mobile phone holder to install a compatible mobile phone (sold separately) 12. GSM antenna (optional) Keep all small parts out of reach of small children. 5 English Getting started Configuration The CK-10 car kit can be installed in various ways. The following figures give examples of typical installation variants. Before you start the installation, ask for professional advice on the configuration that would best suit your needs. Car kit with passive phone holder Car kit with active phone holder 6 Getting started Car kit with separate antenna coupler and external antenna Use of enhancements Ensure that only compatible products are connected to your car kit. Before you begin the installation, ask for professional advice on the enhancements that would best suit your needs. Microphone (component 8) The hands-free unit HF-7 comes with a built-in high-quality microphone. You can also connect an external microphone (for example, an MP-2 microphone) to the car kit to suit your particular needs. Note: Use of any other microphone than the microphone supplied with the CK-10 car kit may affect the transmission quality. Phone holder (passive/comp. 10) To connect a compatible mobile phone to the hands-free unit, you need a phone holder (not included in the sales package). Different phone holders are available for different phone models. 7 English Getting started Antenna coupler (component 9) You can install a separate antenna coupler (not included in the sales package) to connect an external antenna. A range of antenna couplers may be available for mobile phones and phone holders. 9 English Installation · The car kit should not be installed in the head impact area. · Do not wire car kit equipment to the high voltage lines of the ignition system. · Take care not to cause damage to electrical cables, fuel or brake lines, or safety equipment during installation work. · Ensure cables are placed so that they are not subjected to mechanical wear and tear. Do not place cables under car seats or over sharp edges. Installing the car kit See the instructions on page 4 for an example of a suitable installation of the car kit equipment. You also need to install a phone holder (sold separately) that is compatible with the mobile phone to be used. If you want to install an external antenna (sold separately), you either need an antenna coupler that is compatible with the phone holder in use or a phone holder with a built-in antenna coupler. When installing the hands-free unit, ensure that it does not block the vents and is mounted securely and as vibration-free as possible. To mount the unit, attach the mounting plate supplied with the car kit and secure the hands-free unit using the screw that goes through the unit and the phone holder. Installing the hands-free unit (example only) When mounting the antenna coupler AD-14, AXF-13L or AXF-15S, place the washer HH-9 between the coupler and the mounting plate. 10 Installation Finally, insert the cover with the Nokia logo into the recess, and press it into place. Fix the mount for the phone holder on the dashboard or to any other location in the cockpit area where the display is clearly visible for the user and the keypad of the mobile phone is within easy reach of the user. Installing the microphone You can position the built-in microphone to point toward the user's mouth: loosen the securing screw, and carefully turn the microphone opening in the desired direction. While the microphone is in a suitable position, retighten the screw. Loudspeaker SP-3 To ensure good acoustic quality, mount the loudspeaker so that it points into the user's direction. [. . . ] If the car kit is installed in this way, it stays in service as long as a compatible mobile phone remains in the phone holder. Usage 3. Usage To switch your car kit on and off, turn the ignition key. If a mobile phone is in the phone holder and connected to the car kit, the indicator light on the builtin microphone turns on to show that the car kit is active. When you disconnect the mobile phone, the indicator light turns off. [. . . ]