User manual NOKIA DKU-2

[. . . ] Note: Drivers are always installed for specific phone models, not for a cable. For this reason older versions of Connectivity Cable Drivers may not support the latest phone models. Note: Always make sure you use original Nokia cables with Nokia PC Suite to ensure reliable operation of the PC Suite applications. Check the labelling on your cable. 2. · · MUST HAVES To install Nokia Connectivity Cable Drivers on your computer you must have: At least 30 MB of free disk space One of the following operating systems: · Windows Vista 32-bit and 64-bit editions · Windows XP Professional x64 edition (Service Pack 2) · Windows XP (Professional or Home Edition) (Service Pack 2 or later) Free USB port for connecting the cable · · · Windows SP downloads are available from the following Microsoft web pages: For Windows XP (Professional or Home Edition): http://www. microsoft. com/windowsXP/downloads/default. mspx For Windows XP Professional x64 edition: http://technet. microsoft. com/en-us/windowsserver/bb229701. aspx 1/6 3. INSTALLING NOKIA CONNECTIVITY CABLE DRIVERS 3. 1 Before installation If you have a previous installation of Nokia Connectivity Cable Drivers on your PC, you must uninstall it manually. [. . . ] For CA-42 the selected type must be "Serial cable" and for DKU-2, CA-53, CA-70, DKE-2 and CA-101 the type must be "USB". If you use a CA-42 cable make sure the correct COM port is set in Nokia Connection Manager: Start > (Settings) Control Panel > Nokia Connection Manager > Configure. Connect your phone to the PC with the cable and wait until Windows has found all new hardware. Go to Control Panel > System > Hardware > Device Manager. . . (If you are using Windows XP, use the Classic View of Control Panel. ) 3. If the Nokia devices are listed without an exclamation mark next to the icon, the installation was successful. The list should include devices such as "Nokia CA-42 USB Phone Parent", or "Nokia xxxx USB Phone Parent" (xxxx stands for the four-digit model number of the phone). The number of listed devices may vary according to the phone model. If "Nokia xxxx modem" (xxxx stands for the four-digit model number of your phone) is listed without an exclamation mark next to the icon, the installation was successful. · · If all of the above are ok, verify that the installation was successful. Successful installation (xxxx stands for the four-digit model number of your phone) Note that the number of devices listed under Wireless Communication Devices may vary according to the phone model. 3/6 5. If Nokia devices are not listed or they are listed with an exclamation mark, the installation was not successful. In this case you need to uninstall the drivers, restart the computer and reinstall the drivers (see the installation instructions in this document). Figure 2. Unsuccessful installation (xxxx stands for the four-digit model number of your phone) Conflicts with Bluetooth wireless technology software Many drivers and applications that are used by Bluetooth wireless technology reserve several COM ports that may conflict with DKU-2/CA-42/CA-53/CA-70/DKE-2/CA-101 installation. If you have such software installed and the driver installation is not successful (see above for instructions on how to verify the installation), do the following: 1. Uninstall Nokia Connectivity Cable Drivers. Uninstall any Bluetooth wireless technology software according to its instructions. Reinstall Nokia Connectivity Cable Drivers (see the section Installing Nokia Connectivity Cable Drivers in this document for detailed instructions) and verify that the installation succeeded. Reinstall the Bluetooth wireless technology software. [. . . ] Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. The information in this guide was written for Nokia Connectivity Cable Drivers. Nokia operates a policy of ongoing development. [. . . ]