User manual NOKIA FM TRANSMITTER CA-300

[. . . ] Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. [. . . ] In those cases, the car battery might be discharged even if the transmitter is not used. Contact the vehicle manufacturer for more information. The best performance can be achieved when the distance between the FM transmitter and the radio antenna is under 2 meters (6 feet 7 inches). To charge the battery of your compatible Nokia device while using the transmitter, insert the 2. 0-mm charger plug (7) into the charger connector on your device. To switch off the transmitter, pull the cigarette lighter plug from the cigarette lighter socket. Set up Set the volume of the device that is connected to the transmitter to a medium level. Set the volume of your car radio system to the desired level. Select an FM frequency on your car radio system. Select a silent frequency where there is no radio station. Insert the audio plug (6) into the audio connector on your compatible device. If your device has the standard 3. 5-mm audio connector, connect the audio plug into this connector; if the device has the standard 2. 5-mm audio connector, connect the supplied ENGLISH AD-53 adapter to the device and the audio plug to the adapter. On the transmitter, press the frequency up key (3) or frequency down key (5) repeatedly to select the same frequency as on your car radio system. To scroll through the frequencies quickly, press and hold either key. If music is playing on your device, you should hear the music from your car radio system. Save a frequency To save the selected frequency in the transmitter for later use, press and hold the memory key (4) for about 2 seconds until the M1/M2 indicator flashes four times on the display. The transmitter has two memory locations for frequencies, M1 and M2. When you save a frequency for the first time, it is saved in the memory location M1. When you save another frequency, it is saved in the memory location M2. When you save further frequencies, they are similarly saved in either memory location, and the previously saved frequencies are overwritten. Recall a frequency To recall a previously saved frequency, press the memory key to select the frequency in the memory location M1 or M2. ENGLISH Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. [. . . ] · Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Paint can clog the moving parts and prevent proper operation. If the product is not working properly, take it to the nearest authorized service facility for service. [. . . ]