User manual NOKIA FRAME SU-4

[. . . ] User Guide for Nokia Image Frame SU-4 9310658 Issue 1 DECLARATION OF CONFORMITY We, NOKIA CORPORATION, declare under our sole responsibility that the product SU-4 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/declaration_of_conformity/. Copyright © 2003 Nokia. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. [. . . ] This indicator blinks when the Nokia Image Frame attempts to establish the IrDA connection. When the connection is established and the Nokia Image Frame is sending or receiving an image, the indicator is displayed continuously. Confirms that the images have been successfully received or sent (the receiving device has confirmed the images as received). The image is not supported by the Nokia Image Frame. It is, for example, too large or not in the compatible format. An error occurred during the image transfer. This indicator shows how many images have been marked for viewing and how many images in total have been stored. The maximum number of stored images is 50. Copyright © 2003 Nokia. All rights reserved. 10 The progress bar is shown while the Nokia Image Frame processes the received images. Copyright © 2003 Nokia. Getting started Setting up the Nokia Image Frame 1. Connect the lead from the charger to the socket at the back of the Nokia Image Frame (1). Connect the charger to an AC wall socket. Set the Nokia Image Frame on the table with the control keys on the top. If most of your images are in the upright position, you can turn the Nokia Image Frame upright so that the control keys are on the right side of the display. You can turn the table support (2) at the back to change the angle of the Nokia Image Frame display. Copyright © 2003 Nokia. All rights reserved. 12 Switching the power on and off Press Press to switch on the Nokia Image Frame. to switch off the power. Unplug the Nokia Image Frame when not in use. Copyright © 2003 Nokia. Using the Nokia Image Frame Viewing the images If there is only one image in the Nokia Image Frame, it is displayed when you switch on the power. If there is more than one image in the Nokia Image Frame, you can set the Nokia Image Frame to show just one image, or several images in rotation as a slide show. Setting Nokia Image Frame to show one image: 1. Press briefly or to scroll through the images and select the image you want to view. If you press and hold or , the images scroll automatically at 3-second intervals. [. . . ] Press to enter the active IR reception mode. The Nokia Image Frame displays the icon. During the image transfer, the Nokia Image Frame displays the the received images one by one. After all the images have been received, the Nokia Image Frame returns to the previous mode, and the images are stored as the next images after the currently displayed image. [. . . ]