User manual NOKIA HEADSET BH-302

[. . . ] Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. [. . . ] The optimal operating range is shown in dark grey in the picture. The connection is subject to interference from distance and obstructions (shown in light grey) or other electronic devices. The headset is compliant with Bluetooth Specification 2. 0 + EDR supporting the following profiles: Headset Profile 1. 1, Hands-Free Profile 1. 5, Advanced Audio Distribution Profile (A2DP) 1. 0, and Audio Video Remote Control Profile 1. 0. Check with the manufacturers of other devices to determine their compatibility with this device. 4 Introduction There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. 5 Get started 2. Get started Overview The headset contains the following parts: · Fast forward key (1) · Microphone (2) · Volume key (3) · Multifunction key (4) · Play/pause key (5) · Rewind key (6) · Indicator light (7) · Charger connector (8) Before you can start using the headset, you must charge the battery and pair the headset with a compatible mobile phone. Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased. Chargers Check the model number of any charger before using it with this headset. The headset is intended for use with the AC-4, AC-5, and DC-4 chargers. Warning: Use chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. See the user guide of your phone for instructions. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If pairing is successful, the headset appears in the menu of the mobile phone where you can view the currently paired Bluetooth devices. When the headset is connected with your mobile phone and ready for use, the indicator light of the headset slowly flashes blue. Pair and connect the headset with a music player If your phone does not support the A2DP Bluetooth profile, you can separately pair the headset with the phone and a music player that supports this Bluetooth profile. If you have paired and connected the headset with your phone, disconnect the headset from it before pairing the headset with a music player. 8 Get started To pair the headset with a music player, follow the instructions in "Pair and connect the headset with a mobile phone that has a music player feature, " p. If your music player does not have a keypad, it may use the Bluetooth passcode 0000 by default. [. . . ] To reject the call, press the multifunction key twice quickly. To end a call, press the multifunction key, or use the keys of the phone. To mute or unmute the microphone during a call, press the play/pause key. 10 Basic use To switch the call from the headset to a connected phone, press and hold the play/pause key for about 2 seconds. To switch the call back to the headset, press the multifunction key once. Listen to music To listen to music, connect the headset to a compatible music player such as a mobile phone with a music player feature or other music device. [. . . ]