User manual NOKIA HS26W-BK

[. . . ] Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste. For more information, see product Eco-Declaration or country specific information at www. nokia. com. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. ENGLISH The availability of particular products may vary by region. [. . . ] It may take a while before charging starts. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 5 hours of talk-time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power is low, the headset beeps, and the red indicator light starts to flash. Switch the headset on or off To switch on, press and hold the power key until the headset beeps and the green indicator light is displayed. To switch off, press and hold the power key until the red indicator light is displayed briefly. Pair the headset 1. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. ENGLISH 3. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices. To disconnect the headset from your phone, switch off the headset or disconnect it in the Bluetooth menu of your phone. To connect the headset to your phone, make the connection in the Bluetooth menu of your phone, or press and hold the answer/end key. To set your phone to connect with the headset automatically when the headset is switched on, change your paired device settings in the Bluetooth menu. Basic use Wear the headset Place the headset over your ear and slide it downwards (9). Point the headset toward your mouth (9). Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. If your phone supports last number redialing with the headset, press the ENGLISH answer/end key twice briefly when no call is in progress. If your phone supports voice dialing with the headset, press and hold the answer/end key when no call is in progress, and proceed as described in the user guide of your phone. To answer or end a call, press the answer/end key. [. . . ] High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. ENGLISH · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. · Do not drop, knock, or shake the device. [. . . ]