User manual NOKIA MD-6

[. . . ] Nokia Mini Speakers MD-6 3 5 4 2 Issue 1 © 2007 Nokia. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Introduction Congratulations on your purchase. With the Nokia Mini Speakers MD-6, you can listen to music from your compatible mobile phone or music device and enjoy the high-quality audio. [. . . ] To install the batteries, first place the black ribbon © 2007 Nokia. All rights reserved. 3 attached to the speakers across the battery compartment, then insert the batteries as indicated in the compartment. To close the battery cover, align the cover so that the recess points toward the speaker elements, insert the catches on the cover into the corresponding slots on the speakers, and carefully slide the cover toward the speaker elements. To remove the batteries, open the battery cover, and pull the ribbon to lift the batteries from the compartment. During long periods where the speakers are not used, remove the batteries to prevent damage from battery leakage. When battery power is low, the orange indicator light flashes. Use the speakers Slide the release switch of the speaker cable toward the audio plug, and uncoil the speaker cable. 4 © 2007 Nokia. All rights reserved. To connect the speakers to a compatible Nokia device that has the Nokia 3. 5 mm AV connector, insert the audio plug into the connector on your device. To connect the speakers to a compatible Nokia device that has the Nokia 2. 5 mm AV connector, connect the supplied AD-52 adapter to the device and the audio plug to the adapter. To connect the speakers to a compatible device (such as a PC or music player) that has the standard 3. 5 mm audio connector, connect the supplied AD-63 adapter to the device and the audio plug to the adapter. English To switch on the speakers, open the hinged end. To set the volume, use the volume controls on your device. If the sound level of the speakers becomes too low, change the batteries. © 2007 Nokia. All rights reserved. 5 To carry the speakers, close the hinged end, coil the speaker cable, insert the cable into the slot on the coil, and push the coil inside the speakers so that the audio plug remains outside the coil. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. [. . . ] · Do not use harsh chemicals, cleaning solvents, or strong detergents English to clean the device. Paint can clog the moving parts and prevent proper operation. If the product is not working properly, take it to the nearest authorized service facility for service. © 2007 Nokia. [. . . ]