User manual NOKIA MEDIAMASTER 221T

[. . . ] Nokia Mediamaster Owner's Manual Digital terrestrial Free-to-View is a non-subscription service through an existing TV and aerial. Total Channel availability is subject to coverage. You may be required to upgrade your television aerial to enable full service reception. Contact information: Nokia Support: 01793 556 046, E-mail: NHC. sales@nokia. com General information about the Mediamaster Throughout this manual you will notice that the everyday operation of your Mediamaster is based on a series of user friendly on-screen displays and menus. [. . . ] Set the start and stop time using the numerical buttons on your remote control. The different start times may never overlap each other. If you try to enter a start or stop time within an already occupied period of time you will get a warning message. Press select to save or back to cancel. Press back twice to leave the Navi Bars and return to viewing mode. Press and hold to put the Mediamaster in standby. Up to 8 different events can be predefined. The events will be sorted in start time order. At each stop time the box will return to standby. You can erase a predefined event by pressing the button. Press back to cancel the deletion and select to delete the event. Control folder System info In the menu you find general information about which hardware and software version your Mediamaster is running on. GB 18 Navi Bars Settings folder Channel When you want to search for channels at a later time. To open this menu you will be asked to enter your access code. From the factory the access code is set to 1234. A channel search procedure can be performed in different ways: Automatic, Manual or Advanced manual search. Automatic search Highlight the line and press select to start searching for channels. Manual search When you perform a Manual search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu should be supplied by your broadcaster or local aerial installer. Channel: Select the channel you want to search for. Network search: Select "Yes" if you want to search on all transmitters connected to a specific network. Press select to start searching for channels. Within this menu you can also check the strength of your digital signal if you know the UHF channel numbers for your area (This information can be supplied by your local aerial installer. ) Alternatively if you exit this menu and go to a selected channel then re-enter this menu you will see the signal strength for that chosen channel. Advanced manual search The information you need to enter in this menu should be supplied by your broadcaster or local aerial installer. You can use this menu if you are looking for some "specific" channels (i. e. non-DVB standard channels) which can be more easy to find when you have entered the necessary PID settings here. [. . . ] This Agreement is effective from the first date You use this Nokia digital TV receiver. You may terminate this Agreement at any time by returning, at Your own costs, this Nokia digital TV receiver, and all related materials provided by Nokia. Your end-user rights automatically and immediately terminate Nokia Mediamaster software end-user license without notice from Nokia if You fail to comply with any provision of this Agreement. In such an event, You must immediately return at Your own cost, this Nokia digital TV receiver, and all related material to the place of purchase. [. . . ]