User manual NOKIA TMR880

[. . . ] User Guide 9355653 Issue 3 DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product Nokia TMR880 is in conformity with the provisions of the following Council Directive:1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/declaration_of_conformity/. Copyright 2003-2005 Nokia. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. [. . . ] The bar above indicates the signal strength of the radio you are receiving communication from. The higher the bar, the stronger the signal and the better you can receive the communication. If a compatible direct mode gateway is available, is displayed in standby mode and the bar above indicates the signal strength of the gateway. If a compatible direct mode repeater is available, is displayed in standby mode and the bar above indicates the signal strength of the repeater. See Direct mode gateway and repeater on page 70. Copyright 2005 Nokia. All rights reserved. 67 Selecting direct mode channels and groups Up to 60 direct mode channels can be stored in your radio's memory. Up to three groups can be stored for each channel. To select a channel, turn the group selector until the desired channel is displayed. Wait until Group selected is displayed and the radio plays a short tone. If voice feedback is activated, the radio plays the index number of the channel when you turn the group selector. When you select a channel, the first group (A) is automatically selected. Pressing the back key switches between the second and the third group (B and C) on the same channel, and pressing and holding the back key selects the first group (A) on the channel. If voice feedback is activated, the radio plays the index name (A, B or C) of the group when you use the back key. You can also select the channel and group with or . Press or to access the list of channels. Scroll to the desired channel, press Groups and select the desired group. Scanning the groups on a channel Direct mode scanning allows you to receive calls made to the other groups on the same channel. Press Menu and select Settings, Direct mode settings and Direct mode scanning and select On or Off. You can also activate and deactivate direct mode scanning in the fast menu. Press and select Scanning on or Scanning off by pressing and holding . See also Fast menu on page 44. Copyright 2005 Nokia. All rights reserved. 68 I Receiving a direct mode call You can receive calls from the selected group and the scanned groups in the selected channel. Even if scanning is not on, you can receive calls from groups that are on the same frequency and that have been defined as open groups (network service). [. . . ] All rights reserved. 130 Posted facilities Switch your radio off in any facility where posted notices so require. I Potentially explosive atmospheres Switch off your radio when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the radio when at a refuelling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. [. . . ]