User manual NOKIA WIRELESS AUDIO HEADSET HS-37W

[. . . ] Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. [. . . ] Check with the manufacturers of other devices to determine their compatibility with this device. Copyright © 2005 Nokia. Get started There may be restrictions on using Bluetooth wireless technology in some locations. Check with your local authorities or service provider. The headset contains the following parts: · Answer/end key (1) · Yellow light indicator (LED) (2) · Earpiece (3) · Battery compartment (4) · Volume key (5) Before you can start using the headset, you must insert a battery, and pair a compatible phone with the headset. Copyright © 2005 Nokia. All rights reserved. 7 Insert the battery Open the battery compartment by sliding the battery panel off, and insert the battery. Pair the headset with a compatible phone The HS-37W headset goes into the pairing mode when you insert or replace the battery. The yellow LED lights up and remains on for 5 minutes, during which the headset can be paired to a compatible mobile phone. Set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. When your phone finds the HS-37W headset, confirm the pairing from your phone. When prompted for the Bluetooth passcode of the headset, enter 0000. If the pairing was successful, the yellow LED flashes briefly and then switches off. Copyright © 2005 Nokia. All rights reserved. 8 If the pairing was unsuccessful, the yellow LED stays on for 5 minutes, during which you must pair the devices again. You only need to pair the headset with your phone once. To exit the pairing mode, press the answer/end key briefly. You are now ready to use the headset. Copyright © 2005 Nokia. Basic use Call handling To answer a call with your mobile phone, press the answer key on your phone. You can transfer the call to the headset by pressing the answer/end key on the headset briefly. To answer a call with the headset, press the answer/end key on the headset briefly. There may be a slight delay in transfering the call from the mobile phone to the headset. To avoid missing calls, it is recommended that you answer calls with your mobile phone, and then transfer the call to the headset. If you do not want to answer a call, press and hold the answer/end key on the headset for a second. To make a call, dial the number with your mobile phone and press the answer key on your phone. [. . . ] Its moving parts and electronic components can be damaged. · Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the device in cold areas. [. . . ]