User manual NOKIA WIRELESS HEADSET HDW-2

[. . . ] Electronic user's guide released subject to "Nokia User's Guides Terms and Conditions, 7th June, 1998" User's Guide for the Wireless Headset (HDW-2) 9355260 Issue 1 DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product HDW-2 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www. nokia. com/phones/declaration_of_conformity/. Copyright © 2002-2003 Nokia. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia is a registered trademark of Nokia Corporation. [. . . ] The headset beeps and the green indicator light starts blinking. The blinking continues until the headset is connected to your phone, within 5 minutes. If the headset cannot be connected to your phone during this time, the headset is switched off. To switch off: Press and hold the power key for 2 seconds. The headset beeps and the red indicator light is displayed briefly. Taking the headset into use for the first time 1. Make sure that your phone is switched on. Enter your phone's Bluetooth menu and make sure that the Bluetooth feature is activated. Enter the submenu where you can set the phone to search for Bluetooth devices, and start the search. Copyright © 2003 Nokia. All rights reserved. 11 The phone searches for all Bluetooth devices within about 10 meters and displays them as a list. Enter the passkey to associate ("pair") and connect the headset to your phone. The passkey is marked on the card that is provided in the sales package of the headset. Once you have entered the passkey, your phone becomes the default phone for the headset, if the headset has not been previously paired with another phone. See also Using the headset with several phones on page 19. The headset beeps and appears in the phone menu where you can view the Bluetooth devices that are currently paired with your phone. Start using the headset (see page 15). Adjusting the headset to your ear The headset can be worn on either ear. For optimal fit, choose between the two different-sized earloops provided in the sales package. Copyright © 2003 Nokia. To connect the headset to your phone, switch on the headset or make the connection in the phone's Bluetooth menu. Note that switching on the headset creates the connection automatically only if you have set the phone to accept Bluetooth connection requests without your Copyright © 2003 Nokia. All rights reserved. 15 permission. In Nokia phones this can be done by changing your paired devices settings in the Bluetooth menu. For more information on disconnecting the headset from your phone, see page 18. Making a call When the headset is connected to your phone, make the call by using your phone in the normal way. Voice dialling When no call is in progress, press and hold the answer/end key until you hear a tone that indicates that you can say the desired name ("voice tag"). The phone plays the voice tag and dials the related phone number. [. . . ] · Leaving the headset in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the Copyright © 2003 Nokia. All rights reserved. 21 battery between 15°C and 25°C (59°F and 77°F). A headset with a hot or cold battery may temporarily not work, even when the battery is fully charged. [. . . ]