User manual NOKIA WIRELESS PLUG-IN CAR HANDSFREE HF-35W

[. . . ] The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. [. . . ] Contact the vehicle manufacturer for more information. Install the handsfree in the car To function properly, the handsfree must be connected to the cigarette lighter socket of the car, and power must be supplied by the 12 volt car battery. Insert the handsfree into the cigarette lighter socket. You can tilt the cigarette lighter plug to the desired angle (up to 90 degrees). Do not try to force the plug to tilt more. Ensure that the handsfree is properly inserted in the cigarette lighter socket, and does not interfere with the normal operation of the car. In some car models, the cigarette lighter socket is powered by the car battery even when you remove the Switch the handsfree on or off To switch on, plug the handsfree into the cigarette lighter socket, or if already inserted in the cigarette lighter socket, press and hold the function key. When the handsfree is switched on, the indicator light flashes blue. To switch off, press and hold the function key until the indicator light briefly flashes red, or pull the handsfree out from the cigarette lighter socket. Pair the handsfree with a phone 1. Ensure that the handsfree is installed properly and switched off. Press and hold the function key until the indicator light alternately flashes blue and red. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Select the handsfree (Nokia HF-35W) from the list. Enter the Bluetooth passcode 0000 to pair and connect the handsfree to your phone. In some phones you may need to make the connection separately after pairing. If the pairing is successful, the indicator light flashes blue five times, and the handsfree sounds a long beep and appears in the phone menu where you can view the currently paired Bluetooth devices. You can set your phone to connect with the handsfree automatically when the handsfree is switched on. To do this in Nokia phones, change your paired device settings in the Bluetooth menu. To disconnect the handsfree from your phone, switch off the handsfree, or disconnect the handsfree in the Bluetooth menu of the phone. To reconnect the paired handsfree to your phone, ensure the Bluetooth feature is activated in the phone, and switch on the handsfree. If you want to remove the pairing, you can do it in the Bluetooth menu of the phone. ENGLISH Call handling To adjust the volume during a call, use the volume keys on the handsfree. To make a call, use your phone in the normal way when the handsfree is connected to your phone. For optimal performance, check that there are no objects in front of the microphone and that the microphone is in front of the user, not beneath or behind. [. . . ] Paint can clog the moving parts, microphone, or speaker, and prevent proper operation. If the device is not working properly, take it to the nearest authorized service facility for service. ENGLISH Additional safety information Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. [. . . ]