User manual NOKIA WIRELESS PLUG-IN CAR HANDSFREE HF-6W

[. . . ] The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. [. . . ] Introduction 9239331_HF6W_1_en. fm Page 8 Thursday, April 28, 2005 9:42 AM Get started 2. Get started Before you can start to use the handsfree, you must install the handsfree in the car, and pair a compatible phone with the handsfree. Handsfree parts · Power key (1) · Answer/end key (2) · Volume up key (3) · Volume down key (4) · Cable release key (5) · Speaker (6) · Microphones (7) · Indicator lights (8) · Charger cable (9) 8 9239331_HF6W_1_en. fm Page 9 Thursday, April 28, 2005 9:42 AM Get started To function properly, the handsfree must be connected to the cigarette lighter socket of a car, and power must be supplied by the car battery. Insert the handsfree into the cigarette lighter socket of your car as shown in Figure A or Figure B. Make sure that the handsfree is properly locked in place, and does not interfere with the normal operation of the car. 9 English Install the handsfree in the car 9239331_HF6W_1_en. fm Page 10 Thursday, April 28, 2005 9:42 AM Get started Speech tracking works optimally when the speech sound is coming from the area indicated with light gray in the figure. If you encounter unsatisfactory performance, realign the device. In some car models, the cigarette lighter socket is powered by the car battery even when the ignition key is removed. In those cases, the car battery might be discharged if the handsfree is left on, or if the handsfree is turned off but connected to the cigarette lighter socket for a long time. Contact the vehicle manufacturer for more information. Switch the handsfree on and off To switch on, press the power key. The handsfree beeps, and the green indicator light is displayed briefly. 10 9239331_HF6W_1_en. fm Page 11 Thursday, April 28, 2005 9:42 AM Get started Pair the handsfree with a phone The handsfree is specially designed for compatible Nokia phones that support Bluetooth wireless technology. You can, however, use the handsfree with any compatible Bluetooth device that supports the Bluetooth Handsfree profile. Refer to the user guide of your phone for more information on Bluetooth wireless technology. Before you can use the handsfree, you must pair it with a compatible phone. Make sure that the compatible phone is switched on. Make sure that the handsfree is installed properly, and press the power key to switch it on. 11 English To switch off, press the power key when no call is in progress. The handsfree beeps, and the red indicator light is displayed briefly. 9239331_HF6W_1_en. fm Page 12 Thursday, April 28, 2005 9:42 AM Get started 3. Set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. Select the handsfree (Nokia HF-6W) from the list. Enter the Bluetooth passcode 0000 to pair the handsfree with the phone. The phone becomes the default phone for the handsfree, if the handsfree has not been previously paired with another phone. The handsfree beeps shortly, and a continuous blue indicator light indicates an active Bluetooth connection. Start to use the handsfree. Disconnect the handsfree from the phone If you want to disconnect the handsfree from your phone (for example, to connect the phone to another Bluetooth device), switch off the handsfree, or disconnect the handsfree in the Bluetooth menu of the phone. 12 9239331_HF6W_1_en. fm Page 13 Thursday, April 28, 2005 9:42 AM Get started Reconnect the handsfree to the phone If you want to reconnect the handsfree to the default phone or the last used phone, make sure the Bluetooth feature is activated in the phone, and switch on the handsfree. [. . . ] If the device is not working properly, take it to the nearest authorized service facility for service. 21 English · Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. 9239331_HF6W_1_en. fm Page 22 Thursday, April 28, 2005 9:42 AM Additional safety information Additional safety information Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. [. . . ]