User manual NORTEL NORSTAR

[. . . ] Press fl and enter a password provided by your system coordinator to change your class of service. Conference < Establish a conference call between yourself and two other parties. After the second call is connected, press <. Press the line or intercom button of the first held call (not required on the NORSTAR telephone). To remove yourself from a conference permanently (unsupervised conference): Press , . [. . . ] Press to select the mode. Page 4 3. Standard Dial: Select a line, then dial the number. (Standard Dial is always available, even when another dialing mode is selected. ) Automatic Dial: Dial the number without choosing a line button first. Your prime line is automatically selected for the call. Pre-Dial: Dial the number, then press a line button to place the call. Edit the number by pressing before placing the call. Do Not Disturb Group Listening Hold fi Cancel fi When you are not on a call, to prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call. , Cancel , Use both the handset and speaker while you are on a call. To avoid electronic feedback, keep the handset away from the speaker during the call, and press to hang up. Temporarily suspend a call. To retrieve a held call, press the button next to the flashing indicator. (Press on the NORSTAR telephone. ) Exclusive Hold or Temporarily suspend a call and prevent other telephones from picking it up. Language Choice fi, / Select English as the language for the telephone display. fi, Select French as the language for the telephone display. fi, < Select Spanish as the language for the telephone display. Last Number Redial Line pools fi Automatically redial the last external telephone number that you dialed. fl> With a line pool, telephones can share several lines for making calls. (See your system coordinator for a list. ) Line Redirection > Cancel > Send calls arriving on an external line to another telephone outside your Norstar system. Enter the code when you are not on a call to redial the saved number. Show services , Display the services that have been turned on at a designated control set. Ringing service / Cancel / Turn on one of six schedules for alternative ringing/call answering arrangements from a designated control telephone. Restriction services Cancel Turn on one of six schedules for alternative restrictions on particular lines or telephones from a designated control telephone. You are required to enter the System Coordinator password. Routing services < Cancel < Turn on one of six schedules for alternative routing on particular lines or telephones from a designated control telephone. You are required to enter the System Coordinator password. Speed Dial , Dial an external telephone number using a two-digit code. There are two types of speed dial codes: system (01 to 70) and personal (71 to 94). System speed dial codes can be used from any Norstar telephone in the system. They are assigned by your system coordinator. User speed dial codes are used exclusively at your telephone. [. . . ] Stay on the line if you wish to speak to the person first. If an external call is transferred to a busy internal or network extension, or is not answered after a few rings, the call automatically rings again at your telephone. Trunk Answer , , Answer an external call on a line that has been placed into a Ringing Service schedule from any telephone in your Norstar system. This feature does not work for a private line. User Preference Make changes to your button programming, User Speed Dial numbers, call log, dialing options, display language, contrast, and ring type. See your system coordinator for the password to access this programming. Voice call flfl Make a voice announcement or begin a conversation through the speaker of another Norstar telephone without first making the other telephone ring. Page 8 Voice call deny Wait for dial tone Cancel Prevent your telephone from receiving voice calls. [. . . ]