Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual NOVAK BEC. We hope that this NOVAK BEC user guide will be useful to you.
Lastmanuals help download the user guide NOVAK BEC.
Detailed instructions for use are in the User's Guide.
[. . . ] 4-22 Ni-MH cells (1. 2v/cell) or 2-7S Li-Po #5465 5A BEC . . . . . . . . . . . . . . . . . . . 6-8 Ni-MH cells (1. 2v/cell) or 2S Li-Po #5473 5A BEC w/ Li-Po Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 2S Li-Po (only)
Input Voltage Specification:
Input Voltage Specification:
Input Voltage Specification:
WARNING!Always make sure that your battery pack is fully charged before operating your model. [. . . ] For the #5473 module, mount the external LED in a place easily visible when the car is in operation. Find a convenient place to solder the red and black wires to your main power source. Some good places for this are the battery connector or the ESC's positive and negative solder tabs where the main power capacitor connects in an electric vehicle. The wires should be shortened if possible. Plug the BEC's 3-pin JST connector into your receiver's battery slot, making sure the polarity is correct. On most receivers, the black wire will face towards the outside of the receiver and the red will be more towards the center of the receiver.
2.
2.
2.
3.
3.
3.
GENERAL OPERATION: Leave the ESC's power switch OFF for electric vehicles and use the BEC's on/off switch for turning on and off your model. If the ESC's switch is turned on damage can occur!When the BEC is switched on, the blue LED (#5460, #5463, #5465 or charge status LED for #5473) will light up. At this point the BEC will be providing power for the servos and receiver in your model. [over]
GENERAL OPERATION: Leave the ESC's power switch OFF for electric vehicles and use the BEC's on/off switch for turning on and off your model. If the ESC's switch is turned on damage can occur!When the BEC is switched on, the blue LED (#5460, #5463, #5465 or charge status LED for #5473) will light up. At this point the BEC will be providing power for the servos and receiver in your model. [over]
GENERAL OPERATION: Leave the ESC's power switch OFF for electric vehicles and use the BEC's on/off switch for turning on and off your model. If the ESC's switch is turned on damage can occur!When the BEC is switched on, the blue LED (#5460, #5463, #5465 or charge status LED for #5473) will light up. At this point the BEC will be providing power for the servos and receiver in your model. [over]
RECOMMENDED ELECTRIC INSTALLATION: Use this installation method to isolate the ESC from the BEC and receiver. This is the safest way to operate a BEC with an ESC in an electric application. Follow General Installation Steps 1 & 2. Locate the ESC's input signal harness and remove the red wire from the connector. Insulate the red wire to avoid short-circuiting, as this wire is "live. "
RECOMMENDED ELECTRIC INSTALLATION: Use this installation method to isolate the ESC from the BEC and receiver. [. . . ] Be sure that the switch of the BEC unit is turned on.
PRODUCT WARRANTY: Novak Electronics, Inc. guarantees all products to be free from defects in materials or workmanship for a period of 120 days from original date of purchase (verified by dated, itemized sales receipt). In no case shall our liability exceed the products original cost. Warranty does not cover water damage, use with incorrect number of cells, incorrect installation, short-circuiting, failure of main battery pack, or any damage to other electronics used in conjunction with the BEC, including damage caused by a crash, flooding, or act of God. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NOVAK BEC
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual NOVAK BEC will begin.
