Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual NOVAK SMART-STOP LI-PO CUT-OFF MODULE. We hope that this NOVAK SMART-STOP LI-PO CUT-OFF MODULE user guide will be useful to you.
Lastmanuals help download the user guide NOVAK SMART-STOP LI-PO CUT-OFF MODULE.
Manual abstract: user guide NOVAK SMART-STOP LI-PO CUT-OFF MODULE
Detailed instructions for use are in the User's Guide.
[. . . ] SMART-STOP Li-Po Battery Cut-Off Circuit
·read completely before installation or set-up·
The Smart-Stop monitors the Li-Po's voltage & safely cuts off the ESC's throttle output when the voltage drops below a safe level--6. 25V for 2-Cell Smart-Stop (#5470), 9. 375V for 3-Cell (#5472), & 12. 5V for 4-Cell (#5471).
Mounting Position--The Smart-Stop is best positioned near the ESC, as its main power leads (20G Red & Black silicone wires) connect easiest to ESC's battery power wire tabs (if ESC has solder tabs)--Smart-Stop can also connect to battery, battery connector, or battery's power wires. Based on where your Smart-Stop will connect, select a position where the unit can be mounted in the vehicle (do not mount at this time). [. . . ] Connect Smart-Stop's harness to receiver throttle channel (#2), making sure wiring sequence matches the other receiver connections. Very old radio systems may require changing the wiring sequence in plug. Smart-Stop Programming--Sets transmitter's neutral point into Smart-Stop. ESC should already be set-up & programmed to your transmitter (One-Touch on Novak ESCs). With a charged battery pack in vehicle & transmitter turned ON: Press & Hold the Smart-Stop's push button (under heat shrink) then turn on ESCs power switch-continue holding button until the Red LED comes on solid, then release button. Go to Full-Throttle position with transmitter & hold until the Green LED comes on solid, then return to Neutral. The Green LED will flash, then the Red LED will come back on, indicating that the Smart-Stop is programmed & ready. Mount Smart-Stop--Use the included double-sided tape or a tie-wrap to mount the Smart-Stop in vehicle. Mount label-side down if you want access to the push button & LEDs. Blue Indicator LED--Included with the Smart-Stop is a high-power Blue LED that can be mounted in the vehicle where it's easy to see while running--antenna tube, shock tower, wing mount, or ream a hole in the body so it `pops' in from underneath. [. . . ] Warranty does not cover water damage, use with incorrect number of cells, incorrect installation, short-circuiting, or any damage to other electronics used in conjunction with the Smart-Stop. We reserve the right to modify warranty provisions without notice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NOVAK SMART-STOP LI-PO CUT-OFF MODULE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual NOVAK SMART-STOP LI-PO CUT-OFF MODULE will begin.
