User manual NUMARK CD MX-1

[. . . ] ® Professional Disc Jockey Products CD MIX-1 PROFESSIONAL CD MIXING CONSOLE OPERATING MANUAL ©1999 Industries http://www. numark. com CD MIX-1 Safety Information and Product Registration CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance. (7) Ventilation - The appliance should be situated so that it's location or position does not interfere with it's proper ventilation. [. . . ] PITCH SLIDER - The pitch can be changed up to +/-12% by pressing the PITCH button so the PITCH b) When both CD players are playing a CD, the pitch bend function allows the positioning of the bass beats to be matched after the pitch of each disc is matched. PITCH - Is lit when the PITCH BUTTON is active. TIME BAR - Shows either time remaining or elapsed depending on the setting of the TIME BUTTON. PITCH/BPM - Shows the percentage change in pitch or current BPM. TRACK - Shows the current track that the unit is playing. MINUTES - Shows the minutes elapsed or remaining depending on mode setting. SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting. - The Leader in DJ Technology ©1999 Numark Industries -8- http://www. numark. com CD MIX-1 MIXER FEATURES 1. Input fader - Controls individual source levels in the mix 2. Input toggle switch - Selects which source will be live to that channel based on what you have connected to the rear panel input section 3. Replaceable Crossfader - Achieves clean segues between the two input channels. "Hard left" selects Channel 1. "Hard right" selects Channel 2. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws which hold it in place, lift it out and disconnect it's cable. Re-attach the new crossfader and screw the mounting plate back onto the unit - you're back in business!Fader Start ­ Activation allows you to start the CD players from you crossfader. Travel from left to right will start the right CD player and pause the left CD player 5. Mic Input Fader ­ Adjusts microphone level 6. Mic On/Off Toggle ­ Activates microphone 7. [. . . ] All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer. What are the limits on NUMARK'S liabilities?THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. [. . . ]