User manual NUMARK CDN-88

[. . . ] ® Professional Disc Jockey Products PROFESSIONAL DUAL CD PLAYER with Scratch Wheel and Beatkeeper CDN-88 OPERATING MANUAL ©2000 Industries http://www. numark. com CDN-88 Dual CD Player Safety Information and Product Registration CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance. sofa, rug, or similar surface that may block the ventilation opening; or, placed in a builtinstallation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings. [. . . ] Check your point by pressing The "LOOP OUT" point can also be moved while a loop is playing. Press to release the old "LOOP OUT" point and pressing it again at the new desired point. RELOOP/STUTTER: This button performs 2 different functions depending on loop setting. Reloop is only possible if "LOOP" points have been previously set. The "RELOOP" function automatically returns the music to the "LOOP IN" point and will play the loop until it is released with the "LOOP OUT" button. Stutter starts instant play from previously set "Hot" points. Simply set your stutter (Hot Start) point by follow the directions for setting loop in because the points are the same. Remember the button serves also for the reloop function so if a loop out has been set the unit will also loop until released. This function lets you set 3 Hot Start points. The first is based on the "PLAY" cue point and the second two are based upon "LOOP IN". Since the default "LOOP IN" points are also the initial start point your unit can be "stutter" started from up to 3 buttons. NOTE: The CD Player will always remember a new set "Hot" points until you actually set a new "LOOP IN" point or put in a new CD. The new point will be accessible until you remove the CD from the unit. If you change tracks and you previously set a "Loop In" on another track, pressing will jump to that point. - The Leader in DJ Technology ©2000 Numark Industries - 10 - http://www. numark. com CDN-88 Dual CD Player The BeatkeeperTM III and Interlock mode The CDN-88 includes the latest Numark patented BeatkeeperTM technology. The BeatkeeperTM automatically tracks beats based upon a combination of frequencies and rhythm patterns in the music. It shows BPM in the display of each side and outputs 4-count (a. k. a. measure) information about the music in a marching bar graph. The Bar Graph: Most dance music and rock is set up in 4 beat increments called measures. Many of the features within the CDN-88 use this information for incredible results. It's important to understand the basics of how the Beatkeeper works to effectively take advantage of other advanced features in the unit. The bottom LED is for the 1st beat or "Down Beat". Typically most music starts on the down beat so the unit sets the first beat to where the music begins. Occasionally this may not be correct or you may wish to reset it. To reset the down beat simply tap the the new downbeat location as the music is playing or in pause. BEAT SYNC: This button is used for resetting the downbeat and also re-calibrating the BPM. The Beatkeeper is considered by many to be the most accurate automatic beat counter on the market today, however, it occasionally may have trouble determining the correct BPM. [. . . ] Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for (90) days, whichever is longer. All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer. What are the limits on NUMARK'S liabilities? [. . . ]