User manual NUMARK CDN12 Operating Manual

[. . . ] Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed. Water and Moisture - This product should be kept away from direct contact with liquids. 9. Object and Liquid Entry - Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer. 10. [. . . ] OPEN/CLOSE (Disc Tray Open/Close) - Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused. LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. These functions are explained in the next section. TRACK (Track Buttons) - These buttons are used to select the track to be played. Track 10 Button - This button is for quickly advancing to higher tracks on a CD. PITCH (Pitch Button) - This button activates the Pitch Slider (7). PITCH BEND (Pitch Bend Button) - When each of the two CD players is playing a CD, the pitch bend function allows the positioning of the bass beats to be matched after the pitch of each disc is matched. Either player can "catch up" or "fall back" to match the other player. The pitch will automatically rise while the + button is pressed (allowing "catch up") and return to the original pitch when the button is released. The pitch will automatically drop while the - button is pressed (allowing "fall back") and return to the original pitch when the button is released. By changing the pitch of one disc with respect to the other in this way the beats can be matched. PITCH SLIDER - The pitch can be changed up to +/-12% by pressing the PITCH button so the PITCH LED is lit, then moving the sliding fader. The pitch will not be changed if the PITCH LED is off. POWER BUTTON - Used to turn on the unit. DISC TRAY - Will accept either 8cm or 12cm discs. SEARCH WHEEL (OUTER RING) - This wheel has 3 forward and 3 reverse speed positions for searching through songs. The more you turn the wheel in either direction the faster you search through the music. 11. JOG WHEEL (INNER RING) - This jog wheel serves 2 functions depending on the mode you are working in. The jog wheel will act as a slow frame search control when the CD is not playing but either paused or set to a cue point. To set a new frame cue point, spin the wheel then press play when you have determined the proper position. [. . . ] This warranty does not extend to any of our products which have been subjected to misuse, neglect, accident, incorrect wiring not our own, improper installation, or use in violation of instructions furnished by us, nor extended to units which have been repaired or altered outside of our factory, nor to cases where the serial number thereof has been removed, defaced, or changed, nor to accessories used therewith not of our own manufacture. Numark reserves the right to make changes or improvements in its products, during subsequent production, without incurring the obligation to install such changes or improvements on previously manufactured equipment. To place this warranty into effect, the enclosed WARRANTY REGISTRATION CARD must be returned to Numark Industries, LLC within thirty (30) days after date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. [. . . ]