User manual NUMARK CDN32S Operating Manual

[. . . ] ® Professional Disc Jockey Products CDN-32S PROFESSIONAL DUAL CD PLAYER with Buffered memory OPERATING MANUAL ©1999 Industries http://www. numark. com CDN-32S Safety Information and Product Registration CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance. 7) Ventilation - The appliance should be situated so that it's location or position does not interfere with it's proper ventilation. [. . . ] RCA AUDIO JACKS - Connect your CD player to your mixer from this line level output. VOLTAGE SELECTOR - Set this switch to the voltage for your location. IEC POWER CONNECTOR - Plug your supplied power cord into here then plug unit into a power outlet. CONTROL CONNECTOR - Plug your control cables for each unit into here and the back of the remote unit. DIGITAL OUTPUTS - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you must set the digital output selector to on. This will deactivate the variable pitch slider and the pitch bend buttons or pitch wheel. If you were able to adjust the pitch, other devices will not read the digital output properly. c) PLAY - Active while the unit is actually playing a CD. d) PAUSE - Active when the unit is paused. e) CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point. f) PROGRAM - Used for preprogramming the track order to automatically be played by the unit. This is a great function if you need to leave the CD player alone. (Elapsed) is for showing time as it is taking place. (Remain) shows how much time is left on a particular track. This function is controlled by the TIME BUTTON (4). h) SINGLE - Shows when the unit is set to play just one track at a time. When this is not lit the CD will play continuously through all tracks. This function is controlled by the SING/CONT BUTTON (2). i) j) PITCH - Is lit when the PITCH BUTTON is active. TIME BAR - Shows either time remaining or elapsed depending on the setting of the TIME BUTTON (4). k) PITCH - Shows the percentage change in pitch. [. . . ] All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer. What are the limits on NUMARK'S liabilities?THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. [. . . ]