User manual NUMARK CM100

[. . . ] Professional Disc Jockey Products CM-100 PROFESSIONAL DJ MIXER USER'S MANUAL ©1999 Industries http://www. numark. com CM100 Safety Information SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference. c) Heed Warnings - All warnings on this product and in these operating instructions should be followed. d) Follow Instructions - All operating and other instructions should be followed. [. . . ] The more sensitive the adjustment, the quieter you need to speak into your microphone to activate auto-talkover. Treble and Bass Controls ­ for fine-tuning the tone of your voice on both mics through the sound system. The controls are detented for setting tone "flat". For best results, use a dynamic cardioid microphone. NeutrikTM "Combo" connector - allows connection of either a 1/4" jack or an XLR jack. This is ideal for connecting an XLR gooseneck directly into the mixer. CROSSFADER 3. Crossfader Assign Knob - determines which input channel will be heard when the crossfader is moved towards the knob. N o t e : All channels not assigned will remain active. Replaceable Crossfader - achieves clean segues between the two input channels selected by the Crossfader Assign. 9. 4. 5. 6. 7. In this example "Hard left" selects Channel 1 and "Hard right" selects Channel 4. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other. N o t e : The crossfader is user replaceable in case of failure. Simply unscrew the two large screws that hold it in place, lift it out and disconnect its cable. Re-attach the new crossfader and screw the mounting plate back onto the unit - you're back in business!Fader Start ­ activates the crossfader to send play and cue commands to your auto-start Numark CD player or other popular brand. For fader start, attach your mixer to a remote start CD player using industry standard 1/8"(3. 5mm) cables. When you move the crossfader toward the active channel, the attached CD player will start. When it is moved away, that side will cue (similar to pressing the cue button). - The Leader in DJ Technology ©1999 Industries -8http://www. numark. com CM100 EQUALIZER 12. 5-Band Stereo Graphic Equalizer (EQ) compensates for differences in source material sound quality. In ultra-compact mobile systems this EQ can be used to tailor the sound to the acoustical requirements of the room. Center frequencies are 63Hz, 250Hz, 1kHz, 4kHz and 16kHz. Faders have a center detent for an accurate "flat" response. Below is a typical "house" EQ curve. [. . . ] Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for (90) days, whichever is longer. All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer. What are the limits on NUMARK'S liabilities? [. . . ]